How do I install the product?------ Method 1: Self-adhesive installation
Method 1: Self-adhesive installation
1?Wipe off the dust on the wall.
2. Remove the adhesive from the back of the hook.
3. Stick the hook on the wall and press firmly for 30 seconds.
4. Leave the hook on the wall for 24 hours before use.
How do I install the product? ------Method 2: Drilling Installation
Method 2: Drilling Installation
1?Mark the hole points.
2?Drill holes at marked locations.
3?Punch the punch plug intothe hole.
4?Punch the screw into the hole to fix the product.
Which surfaces are suitable for the hook?
Smooth surfaces use self-adhesive mounting: marble, tile, glass, etc.
Rough surfaces are installed using drilled holes: plasterboard, concrete walls, wallpaper walls, etc.
Wooden surfaces can be installed using self-adhesive or drilled holes.
How do I adjust the direction of the hook?
Removable and adjustable direction design.
Installation steps are as follows:
1. Remove the hook from the base plate.
2. Orient the hook.
3. Align the notch on the bottom of the hook with the bump on the base plate and install with a little force.
How is the product's load-bearing capacity? Will it squeeze the hat causing it to warp?
Our "I-beam" structure makes the product not only more solid, no bending and deformation, but also can withstand the weight of 30lbs. The "L''-shaped design of the product is perfect for keeping the shape of the hat.
How do I install the product?------ Method 1: Self-adhesive installation
Method 1: Self-adhesive installation
1?Wipe off the dust on the wall.
2. Remove the adhesive from the back of the hook.
3. Stick the hook on the wall and press firmly for 30 seconds.
4. Leave the hook on the wall for 24 hours before use.
How do I install the product? ------Method 2: Drilling Installation
Method 2: Drilling Installation
1?Mark the hole points.
2?Drill holes at marked locations.
3?Punch the punch plug intothe hole.
4?Punch the screw into the hole to fix the product.
Which surfaces are suitable for the hook?
Smooth surfaces use self-adhesive mounting: marble, tile, glass, etc.
Rough surfaces are installed using drilled holes: plasterboard, concrete walls, wallpaper walls, etc.
Wooden surfaces can be installed using self-adhesive or drilled holes.
How do I adjust the direction of the hook?
Removable and adjustable direction design.
Installation steps are as follows:
1. Remove the hook from the base plate.
2. Orient the hook.
3. Align the notch on the bottom of the hook with the bump on the base plate and install with a little force.
How is the product's load-bearing capacity? Will it squeeze the hat causing it to warp?
Our "I-beam" structure makes the product not only more solid, no bending and deformation, but also can withstand the weight of 30lbs. The "L''-shaped design of the product is perfect for keeping the shape of the hat.