Sunco 1x4 Black LED Flat Panel Light, Surface Mount, Dimmable

SURFACE MOUNTS DIRECTLY, NO
DROP CEILING GRID NEEDED: The Sunco 1x4 Black LED Flat Panel Light surface mounts directly to a ceiling, so it is not limited to a 2x2 or 2x4 T-bar drop-ceiling grid the way a standard flat panel is. This 1x4 flat panel light fits the long, narrow footprint of a traditional shop light or utility strip, making it a direct upgrade over an old fluorescent tube fixture in a garage, laundry room, hallway, or closet.
SELECTABLE 30W, 40W, OR 46W
FOR THE ROOM: A switch on this 1x4 LED flat panel light sets the output to 30W, 40W, or 46W, running from 3000 lumens up to 4600, so one panel covers a small utility closet at the low setting or a full garage bay at the top. Choose the wattage setting at install.
SELECTABLE 3500K,
4000K,
OR 5000K: The same switch that sets wattage also sets color temperature on this flat panel light, choosing between 3500K, 4000K, or 5000K before it goes up. 3500K keeps a hallway or laundry room on the warmer side of neutral, 4000K is the clean, balanced white many utility and garage spaces use, and 5000K pushes to the brightest, coolest daylight for a workbench or detail-oriented task area. An 80+ CRI keeps colors reading true at every setting.
DIMMABLE, DAMP RATED, BUILT FOR 50, 000
HOURS: This 1x4 flat panel light is dimmable on a compatible dimmer, so the output can drop below its selected wattage tier for a softer level when full brightness is not needed. It is damp rated for laundry rooms, covered porches, and humid utility spaces, and runs at 100 lumens per watt, consistent efficiency across all three wattage settings. ETL listed, FCC compliant, and RoHS compliant, with a 50, 000 hour rating.
BLACK FINISH,
ALUMINUM AND STEEL BUILD: The matte black finish on this LED flat panel light stands out deliberately rather than disappearing into a white ceiling, a look suited to garages, workshops, and modern utility spaces where this panel is meant to be seen. Built from aluminum and steel with a polycarbonate lens, it holds an IP20 rating and runs on 120V, weighing about five and a half pounds.