4 Frequency RFID Copier Reader Writer Programmer + 5 Pcs EM4305 T5577 Rewritable ID Keyfobs Tags Card

For the 5 pcs keyfobs, we provide the Random color by default, if need the Blue or Yellow or Red or Orange or Pink or White or Green or Black or Light Black ones, please leaving message, for example, leaving message "please arrange 1 Blue, 1 Yellow, 1 Red, 1 Black, 1 White"
Because the shipping can't include the batteries, so the package won't include the batteries!
Adapt to all working frequency 125KHZ read chip cards.
Write accommodate all EM4305 EM5200 etc. all writable chip card 125KHZ
Instructions:
1 switch: Press the power button, release it. Red
2 reader: the card close to the sensing area (the space above the buttons), press the "Reader" button lights in green when reading cards.
3 write card: Insert a blank card near the sensing area, press "Write Card" button lights in green card writing success.
4 card input (no master card case): Press "card enter" key, according to the left-most card number (10-bit) value of the same second "+1"Key, then press the right arrow moves one, and then the same number of "+1" button, and if the number is 0 to skip directly press the Right, all done, press "Enter card number" key lights up in green to indicate success.
5 Card contrast: Press the "reader" and then press "Write Card" while open, read first read the second, in the same light green card.
6 When the indicator light is too dark, reader, writing cards too close or failure, please replace the battery.
Operation method:

1. Place the mother card work area.
2. press "read" key, buzzer "DI. DI. DI", work led flashing

3. Place the new card open work areas.
4. press "write" key, buzzer "DI. DI. DI. DI", work led flashing, Write a repeatable

5. No operation, 30 seconds automatically shut down, press any key to boot.