Your Browsing History
Meet Your Seller
Two-Way Brushed ESC 12V-26V 3S-6S 200A 2000W High-Power Speed Controller with LED Lights for RC Trawler 997 Motors
- After power-on, the led indicator flashes slowly for 3 times for self-test, and the steady light after self-test means normal operation.; Continuous fast flash - Loss of throttle signal; If the throttle is not in the middle position at the time of power-on, the LED flash intermittently. At this time, you need to adjust the throttle position to the middle point and the LED can work only after the LED is always on, otherwise the ESC cannot work in the fast flashing state.; LED indicator light: Always on: working normally. Intermittent flash: Throttle at the time of power-on is not in the safe position at the midpoint.; If the throttle signal is lost and the LED flashes quickly, the motor stop
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Yaregelun To avoid excessive current when locked-rotor, keep
enough power headroom suggestions: 12V
working condition: 6pc 540 or 6pc 550 or 4pc 775 or 4pc 795 or 4pc 895 or single 997 24V working condition: 4pc 775 or 4pc 795 or 2pc 895 or 2pc 997 The switch UBEC 5V 3A can drive two 25kg servos. It is not a 7805 linear regulator, so two ESCs cannot be used to power the receiver at the same time. (When multiple ESCs are working simultaneously, only one can supply power to the receiver. Use a toothpick to pick out the 5V red wire of the head of the other ESCs, then fold it up and wrap it with tape. There is no need to cut the wire. )
Item name: 200A 3S-6S
Dual Way Brushed ESC Size: 7x8x 2.5 cm
Working current: 12V-26V(3S-6S)
Controller input pulse width: 0.8 ms- 2.2 ms, 1.5 ms is the mid-point There are 48pcs large power mos tube(same power on forward/reverse rotate), 12pcs large power mos tube on the
H bridge current: 200A
Rated power: 2000W Only forward and reverse rotation mode, no brake mode With out of control protection
Attention: This item is not waterproofed. If one receiver uses two ESCs at the same time, you need to cut off the red positive wire in the middle of the BEC signal line of one ESC. One ESC can supply power to the receiver. If two ESCs supply power to the receiver at the same time, it burn.
Color: As
Shown Material: plastic
Package Contents: 1 x ESC Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
enough power headroom suggestions: 12V
working condition: 6pc 540 or 6pc 550 or 4pc 775 or 4pc 795 or 4pc 895 or single 997 24V working condition: 4pc 775 or 4pc 795 or 2pc 895 or 2pc 997 The switch UBEC 5V 3A can drive two 25kg servos. It is not a 7805 linear regulator, so two ESCs cannot be used to power the receiver at the same time. (When multiple ESCs are working simultaneously, only one can supply power to the receiver. Use a toothpick to pick out the 5V red wire of the head of the other ESCs, then fold it up and wrap it with tape. There is no need to cut the wire. )
Item name: 200A 3S-6S
Dual Way Brushed ESC Size: 7x8x 2.5 cm
Working current: 12V-26V(3S-6S)
Controller input pulse width: 0.8 ms- 2.2 ms, 1.5 ms is the mid-point There are 48pcs large power mos tube(same power on forward/reverse rotate), 12pcs large power mos tube on the
H bridge current: 200A
Rated power: 2000W Only forward and reverse rotation mode, no brake mode With out of control protection
Attention: This item is not waterproofed. If one receiver uses two ESCs at the same time, you need to cut off the red positive wire in the middle of the BEC signal line of one ESC. One ESC can supply power to the receiver. If two ESCs supply power to the receiver at the same time, it burn.
Color: As
Shown Material: plastic
Package Contents: 1 x ESC Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by LUOYIMAN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...