24 Pin to 6 Pin ATX PSU Power Adapter Cable for Dell Motherboard with 6 Pin Port Compatible with Dell Optiplex, Inspiron, Vostro & Acer Desktop PCs 18AWG 13.3 Inch (34cm)

About this item

1. CONVERT STANDARD ATX PSU TO DELL 6-PIN MOTHERBOARD Replace your underpowered Dell OEM power supply with any standard ATX PSU (up to 1000W). This adapter connects the 24-pin output of your standard power supply to Dell motherboards that use a proprietary 6-pin power connector .
2. CRITICAL COMPATIBILITY VERIFY YOUR DELL MODEL BEFORE ORDERING Compatible with: Dell OptiPlex 3050/3060/3080/5050/5060/5080/7040/7050/7060/7070/7080 MT (Mini Tower), Inspiron 3470/3668/3669, Vostro 3650/3653/3660/3667/3668/3669/3888/V3267 NOT compatible with: Dell Workstations (Precision series), OptiPlex 3020/7020/9020 (8-pin models), OptiPlex 7070/7080/7090 (specific 6-pin models have different pinout), any 8-pin Dell motherboards
3. PREMIUM 18AWG CONSTRUCTION SAFE & RELIABLE Built with UL1007 18AWG tin-coated copper wire for stable power delivery and minimal voltage drop. Rated for up to 1000W, making it suitable for high-performance upgrades . Factory-tested for reliability under load.
4. OPTIMAL CABLE LENGTH EASY INSTALLATION Total length: 13.3 inches (34cm) including connectors . Provides ample reach for routing inside mini tower and mid-tower cases while maintaining clean cable management.
5. IMPORTANT COMPATIBILITY NOTES READ BEFORE BUYING Does NOT work with Dell Precision Workstations . PSU Stays Powered: When connected to some Dell/Acer motherboards, the power supply will remain active (fan spinning) even after the computer is shut down. The PSU will only fully stop when unplugged from AC power or switched off at the PSU . This is normal for this adapter type. Please double-check your PC model against the compatibility list before ordering. Connecting to unsupported models may damage your motherboard.

Upgrade Your Dell PC with Any Standard Power Supply

Dell OptiPlex, Inspiron, and Vostro desktop computers use proprietary 6-pin power connectors on their motherboards, making standard ATX power supplies incompatible without an adapter. This 24 Pin to 6 Pin conversion cable solves that problem, allowing you to replace your underpowered Dell OEM PSU with any standard ATX power supply up to 1000W.

Critical: Verify Compatibility Before Purchase

This cable is designed for Dell motherboards with a 6-pin power connector. It works with:

1. OptiPlex 3050, 3060, 3080, 5050, 5060, 5080, 7040, 7050, 7060, 7070, 7080 (Mini Tower)
2. Inspiron 3470, 3668, 3669
3. Vostro 3650, 3653, 3660, 3667, 3668, 3669, 3888, V3267

DOES NOT WORK WITH:

1. Dell Workstations (Precision series)
2. OptiPlex 3020, 7020, 9020 (these use 8-pin connectors)
3. OptiPlex 7070, 7080, 7090 (6-pin but different pinout)
4. Any Dell motherboard with 8-pin power connector

Technical Specifications:

1. Connector A: 24-pin ATX Female (to standard PSU)
2. Connector B: 6-pin Proprietary Dell Male (to Dell motherboard)
3. Wire Gauge: 18AWG Tinned Copper (UL1007 standard)
4. Length: 34cm / 13.3 inches (including connectors)
5. Max Power: 1000W
6. Voltage: 12V DC

Important Operation Note: Due to Dells proprietary power management design, the power supply will remain in standby mode (fan may continue spinning) after computer shutdown. You must unplug the power cable to fully power off the PSU. This is normal behavior and does not indicate a defect.

Whats Included:

1. 1x 24 Pin to 6 Pin ATX Power Adapter Cable (34cm / 13.3-inch)

Technical Specifications:

1. Connector A (PSU): 24-pin ATX Female
2. Connector B (Motherboard): 6-pin Dell Proprietary Male
3. Wire Gauge: 18AWG Tinned Copper (UL1007)
4. Length: 34 cm / 13.3 inches (including connectors)
5. Max Power: 1000W
6. Voltage: 12V DC

Quality You Can Trust:

1. 18AWG Tinned Copper Conductors for Stable Power
2. UL1007 Rated Wire Factory Tested