ATX 24 Pin Power Supply On/Off Switch with Red LED, PSU Jumper Bridge Adapter Cable 18AWG 55cm, PC Power Supply Starter for Bench Test, Water Cooling Pump, Computer Maintenance Tool

1. EFFORTLESS ATX POWER SUPPLY CONTROL NO MORE PAPERCLIPS Eliminate the hassle and risk of using a paperclip to jump-start your power supply. This professional-grade adapter connects to your PSUs 24-pin motherboard connector and provides a convenient push-button switch to turn your power supply on and off with a single click. Ideal for PC builders, water cooling enthusiasts, and hardware testers.
2. BRIGHT RED LED INDICATOR KNOW WHEN YOUR PSU IS ACTIVE The integrated red LED light illuminates when the power supply is switched on, providing a clear visual confirmation that your PSU is delivering power. No more guessing whether your test bench, water pump, or other components are receiving power the LED tells you at a glance.
3. PREMIUM 18AWG CONSTRUCTION SAFE & RELIABLE Built with high-quality 1007-18AWG tin-coated copper wire for stable power delivery and minimal voltage drop. Rated for up to 1000W, making it suitable for high-performance power supplies used in gaming rigs, mining setups, and server systems. Factory-tested for reliability under load.
4. OPTIMAL CABLE LENGTH 55CM (21.5 INCHES) Total length of 55cm (21.5 inches) including connectors provides ample reach for routing the switch to a convenient location outside your test bench or PC case. No more fumbling around the back of your power supply place the switch exactly where you need it.
5. VERSATILE APPLICATIONS WATER COOLING, PSU TESTING, DIY PROJECTS Perfect for: Water Cooling Loop Maintenance: Run your pump independently to fill coolant and purge air bubbles without powering the motherboard PSU Testing: Quickly verify if a power supply is functional before installing in a new build Bench Power Supply: Convert any ATX power supply into a bench power source for electronics projects Multi-PSU Mining Rigs: Control additional power supplies in parallel setups
6. IMPORTANT OPERATION NOTES Requires Load: Some power supplies (especially server PSUs) may not start without a connected load. Ensure you have a water pump, fan, or other device connected before switching on Red LED = Power On: When the LED is illuminated, your PSU is delivering power. Always exercise caution when working with live circuits Compatibility: Works with standard ATX 20/24-pin power supplies. Not compatible with 8-pin server motherboards or proprietary Dell/HP PSUs.

The Professionals Choice for ATX Power Supply Control

Tired of the old paperclip trick? The 24 Pin ATX Red LED Power On/Off Switch Jumper Bridge Adapter transforms any standard ATX power supply into a convenient bench power source. Whether youre filling a custom water cooling loop, testing hardware, or powering DIY electronics projects, this adapter gives you clean, safe, one-button control over your PSU.

Critical: Verify Compatibility Before Use

This adapter is designed for standard ATX 20/24-pin power supplies. It works with:

1. ATX 24-pin PSUs (desktop computer power supplies)
2. ATX 20-pin PSUs (older models LED light may not function)
3. Most standard PC power supplies from brands like Corsair, EVGA, Seasonic, Cooler Master, Thermaltake, etc.

DOES NOT WORK WITH:

1. 8-pin server motherboard power supplies
2. Dell/HP/Lenovo proprietary power supplies (consult your PSU manual)
3. PSUs under 300W (may not have sufficient standby power)

How to Use:

1. Insert the 24-pin connector into your power supplys motherboard cable port
2. Connect your desired load (water pump, fans, or other devices) to the PSU
3. Press the switch to turn the power supply ON the red LED will illuminate
4. Press again to turn OFF

Important Operation Note:Some power supplies, particularly high-efficiency or server-grade units, require a minimum load to start. If your PSU does not start when you press the switch, connect a fan or hard drive to one of the PSUs peripheral cables and try again.

Technical Specifications:

1. Connector A: 24-pin ATX Female (to PSU)
2. Connector B: Push-button Switch with Red LED
3. Wire Gauge: 1007-18AWG Tin-Coated Copper
4. Cable Length: 55cm / 21.5 inches (including connectors)
5. Max Power: 1000W
6. Voltage: 12V DC
7. LED Function: Illuminates when PSU is ON

KIT INCLUDES

1. 1x 24 Pin ATX Red LED Power On/Off Switch Jumper Bridge Adapter Cable (55cm / 21.5-inch)