ATX 3.0 PCIe 5.0 12VHPWR Cable 2x8 Pin to 16 Pin 600W GPU Power Cord, Type A 4-Pin on Bottom, 16AWG 60cm (24in), for EVGA G7/G6/G5/G3/G2/P2/T2 & Super Flower Leadex Titanium/Platinum/III Series

1. EVGA & SUPER FLOWER SPECIFIC EXACT PINOUT MATCH Engineered specifically for EVGA Type 1/Type 2 and Super Flower unified pinout power supplies. Compatible with: EVGA Series: G7, G6, G5, G3, G2, P+, P6, P5, P3, P2, T2, G1+, GA, GM, B5, B3, PQ, PS, GS Super Flower Series: Leadex Titanium, Leadex Platinum, Leadex Platinum SE, Leadex III, Leadex VII NOT compatible with Corsair, Seasonic, or other brands using with incompatible PSUs WILL cause permanent damage to your GPU and/or power supply.
2. TYPE A CONFIGURATION 4-PIN ON BOTTOM DESIGN This cable features the Type A design, with the 4-pin sense wires positioned on the bottom side of the connector (closer to the GPU PCB). This configuration is optimized for graphics cards with thick backplates or limited clearance above the power connector, ensuring full insertion without interference. Also available in Type B (4-Pin on Top) for different GPU layouts.
3. 90° ANGLED CONNECTOR PERFECT FOR TIGHT CASES The factory-molded 90° angled 12VHPWR connector eliminates the need to bend cables near the GPU portthe #1 cause of connector failure. Requires only 20mm of clearance from the side panel. Standard straight cables often require sharp bends that press against glass side panels; our angled design routes the cable cleanly, allowing you to install wide graphics cards in compact chassis.
4. 600W POWER DELIVERY PCIe 5.0 & 12V-2x6 READY Built to power the most demanding graphics cards. This cable delivers up to 600W of stable power through two 8-pin PCIe inputs on your EVGA or Super Flower PSU. Fully compatible with NVIDIA GeForce RTX 40 Series (4090/4080/4070/4060) and RTX 30 Series (3090 Ti). Supports both 12VHPWR and the updated 12V-2x6 GPU connector standards.
5. PREMIUM 16AWG CONSTRUCTION HIGH THERMAL ENDURANCE Built with high-quality 16AWG tinned copper wire, capable of carrying up to 55A of current with 105°C temperature rating. Features premium high-current terminals rated for reliable power delivery up to 600W. Each cable is factory-tested for safety and performance.
6. OPTIMAL 60CM (24 INCHES) CABLE LENGTH Total length of 60cm (24 inches) provides ample reach for routing behind the motherboard tray or through cable management channels in full-tower, mid-tower, and compact cases. The premium black flexible ribbon wire design allows for clean, professional cable management.
7. CRITICAL INSTALLATION SAFETY WARNINGS The #1 cause of 12VHPWR connector failure is incomplete insertion. When connecting to your GPU: Push the connector straight and firmly into the GPU port until you hear a CLICK Verify that no gap exists between the connector housing and GPU socket Do not bend the cable within 35mm (1.4 inches) of the connector maintain a straight approach as required by PCI-SIG specifications Regularly inspect the connector for signs of melting or discoloration, especially with high-power GPUs like RTX 4090

Upgrading to an NVIDIA GeForce RTX 4090, 4080, 4070, 4060, or 3090 Ti graphics card? The ATX 3.0 PCIe 5.0 90-Degree Angled 12VHPWR Cable (Type A) is the solution you need to power your next-gen GPU directly from your EVGA or Super Flower modular power supply.

No need for bulky adapters or sharp cable bendsthis clean, single-cable solution delivers up to 600W of stable power through two standard 8-pin PCIe connections on your PSU. Requires only 20mm of clearance from the side panel.

This cable features the Type A design, with the 4-pin sense wires positioned on the bottom side of the connector (closer to the GPU PCB). This configuration is specifically optimized for graphics cards with thick backplates or limited clearance above the power connector, ensuring full insertion without interference.

Type A is ideal for:

1. Graphics cards with thick backplates that may interfere with connectors
2. GPUs where the area above the power connector has limited clearance
3. Ensuring full insertion without obstruction from backplate or cooling components

This cable is designed for EVGA Type 1/Type 2 and Super Flower unified pinout power supplies. It is NOT compatible with Corsair, Seasonic, or other PSU brands. Using with incompatible PSUs WILL cause permanent damage.