PCIe 6 Pin to 8 Pin (6+2) Adapter Cable 2-Pack 18AWG Power Cord for CoolerMaster Thermaltake PSU, 20-inch (51cm) for GPU Graphics Card

1. CONVERT 6 PIN TO 8 PIN (6+2) PCIe POWER This adapter cable allows you to power an 8-pin graphics card from a power supply that only has a 6-pin PCIe port available. The 6-pin male end plugs into your PSUs 6-pin PCIe port, and the 8-pin (6+2) male end connects to your graphics card. The 6+2 design allows you to slide the extra 2-pin section on or off, so it can be used as either a 6-pin or 8-pin connector.
2. COMPATIBILITY COOLERMASTER & THERMALTAKE PSUs ONLY This cable is specifically designed for CoolerMaster and Thermaltake power supplies with a standard 6-pin PCIe port. It has been tested and verified to work with these brands. NOT compatible with EVGA, Corsair, Antec PSUs, or Thermaltake Toughpower series. Please carefully check your PSUs brand and model before ordering.
3. 18AWG HIGH-QUALITY WIRE SAFE & RELIABLE Constructed with 1007-18AWG standard tin-coated copper wire for stable, efficient power delivery. The 18AWG gauge provides lower resistance and better conductivity than thinner cables delivering clean, stable power to your graphics card. Each cable is factory-tested to ensure quality and reliability.
4. 20-INCH (51CM) LENGTH EASY CABLE MANAGEMENT At 20 inches (51cm) including connectors, this cable provides ample length to reach your graphics card comfortably while allowing for neat cable management inside your case. The ribbon-style cable design offers flexibility for clean routing.
5. DESIGNED FOR GRAPHICS CARDS NOT FOR MOTHERBOARDS This cable is specifically designed for graphics/video cards only it does NOT work with motherboards. Compatible with 6-pin and 8-pin graphics cards from popular manufacturers including ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, and more.
6. CRITICAL SAFETY WARNING Using this cable with incompatible PSU brands or connecting it incorrectly will burn or damage your PSU or graphics card. This cable is only for the brands listed above please verify compatibility before installation. Do not connect this cable to a 6-pin peripheral connector it will damage your device. The 6-pin end and 8-pin (6+2) end cannot be used interchangeably.

Does your power supply only have a 6-pin PCIe port, but your new graphics card requires an 8-pin connection? The 6 Pin to 8 Pin (6+2) PCIe Adapter Cable is the simple, cost-effective solution-.

This adapter cable allows you to connect a graphics card with an 8-pin PCIe power connection to a power supply that only has 6-pin PCIe connections available-. Instead of upgrading your entire power supply, simply add this cable and power your modern GPU.

The Problem The Solution

Your PSU only has 6-pin PCIe ports This adapter converts 6-pin to 8-pin (6+2)

Your new GPU requires an 8-pin connection Power your graphics card without upgrading your PSU

You want to avoid the cost of a new PSU A cost-effective alternative to PSU replacement

Compatible PSUs:

1. CoolerMaster power supplies with standard 6-pin PCIe port-
2. Thermaltake power supplies with standard 6-pin PCIe port (excluding Toughpower series)-2-

× NOT Compatible PSUs:

1. EVGA PSUs--1
2. Corsair PSUs--1
3. Antec PSUs--1
4. Thermaltake Toughpower series-2
5. Other power supply brands not listed above-2