NEXCOM Industrial SSD| Network-Attached Storage (NAS) iNAS330 Marvell 88F6820 Dual Cortex®-A9 CPU On-board 512MB DDR3

iNAS 330 Industrial-Strength NAS - Stable Storage and Remote Access in Harsh Environments

AIoT Software free downloadKEY_TAB https://www.aiotcloud.dev/en/community-version

The iNAS330 is extremely rugged-design network-attached storage (NAS), which was designed to provide high performance, reliability storage in harsh environments. Equipped with SSD storage technology, it is able to record the data correctly in harsh environments, such as oil exploration, transportation, and Industrial automation…, etc.

Furthermore, it offers several data backup options. It supports FTP service and SMB/CIFS protocol for file sharing among cross-platforms. Atlas OS™ provides real-time information, toolkit, widgets and easy mode of operation; software center provides more application extensions in the future, based on application requirements. iNAS330 also can be networking surveillance storage, with high-resolution camera, the file system could be used on video recording which supports RAID 5 and also that offers the better data protection.

The iNAS330 supports Power over Ethernet (PoE/PoE+) and follows the specifications in IEEE 802.3af/ IEEE 802.3at. It has dual PoE+ interface which supports power redundancy. The iNAS330 is a fanless but high efficient for thermolysis, dust- and water-protected IP 54-rated chassis.

The Trend

Safe storage and data retention are critical in the digital era. Every day, more than 4.88 billion internet users generate well over 2.5 quintillion bytes of data, serving the needs of both large corporations and individuals. With such a massive quantity of data, how do you safely store it, ensure it is readily accessible to those that need it, and protect it from being stolen by outsiders? Now add the rise and spread of the internet and the ability to access data from anywhere. Suddenly, preserving and securing data from unauthorized access becomes even more challenging. That is where Network-Attached Storage (NAS) comes in and why it plays a crucial role in modern data storage.

NAS centralizes data. For large enterprises, the centralized storage of company data allows employees fine-grained access and provides seamless data exchange between branches, divisions, and locations, for unified management and real-time data sharing. For Individuals and small studios, a NAS can store essential data and allow remote access via the internet.

NAS protects data. In addition to local storage and access, a NAS has built-in mechanisms to protect data even if a hard drive fails or some other mechanical failure occurs. A RAID, for example, protects against data damage when storage media fails. There are also other additional authentication and authorization mechanisms to control data access and avoid data leaks.

NAS backs up everything. With good planning, you can use multiple NAS to backup other local storage devices to further reduce the risk of data damage or loss and maintain the accuracy and availability of data.

NAS supports remote work. With the uptick in work-from-home during COVID-19, remote access to data over the internet is critical. A NAS that allows secure remote access is needed so that everyone can work at home while having full access to the data they need to get their work done.

The Challenge

Most NAS is designed for indoor use, usually with ample air-conditioning in large enterprises or homes, but rarely anywhere but indoors. However, the utility of NAS makes it desirable in places not ideally suited to them, places with very high or low temperatures, high humidity, and lots of dust. Some examples include outdoor substations, oil drilling platforms, transportation equipment, outdoor small computer rooms, and industrial environments. An average NAS designed for indoor use just cannot be used in these situations.

One more challenge is to provide access management at the endpoints. Physical access to NAS in remote areas is often difficult to impossible. So, one of the critical requirements is user-friendly and functional software to enable remote management, real-time statistics gathering, and a reliable notification system.

NEXCOM Solution

The NEXCOM iNAS 330, a NAS device for industrial environments, is the answer to these challenges. It can operate from -40 to 70°C (-40 to 158°F) when using SSDs, or -25 to 55°C (-13 to 131°F) when using HDDs. The primary limitation on operating temperature is a physical limitation of SSDs and HDDs rather than the NAS device. When disk manufacturers launch SSD or HDD products that can support higher or lower operating temperatures, the operating temperature of the iNAS 330 can accommodate those.

The iNAS 330 has a Marvell™ ARMADA® dual-core Cortex®-A9 ARM® processor with high performance and low power consumption. It supports up to three 2.5” drives and uses IP67-rated M12 waterproof connectors for Ethernet connections, including two 1GbE LAN ports with redundancy and one 1GbE LAN management port. The iNAS 330 is a IEEE 802.3af/at compliant PoE PD, so it is easy to install in any place without an AC or DC power source. It also supports power redundancy so that it can provide higher reliability and stability. Fanless and IP54 metal chassis design helps the iNAS 330 operate in harsh environments.

Multiple LEDs on the front panel indicate the current system status, including power, system, PoE, temperature, HDD, and LAN. It is easier for the user to know if there is something wrong without logging into the system.

Atlas OS&trade

NEXCOM’s proprietary embedded Atlas OS™ is available for the iNAS 330 and provides a visual user interface (UI) to configure the network, create a RAID, and share specific folders with certain users through permission settings. Instead of requiring a dedicated software application, the Atlas OS™ provides a web desktop, a web-based cross-browser HTML5- and CSS3-powered UI, with a centralized management panel and dual-desktop system for easier and faster switching between different windows and tasks. The web desktop is a single-page application that dynamically updates page data from the webserver for smoother operations and real-time information.

Atlas OS™ for iNAS 330 focuses on two major features: networking and storage. Network stability and bandwidth efficiency are critical issues in harsh environments. The iNAS 330 has two LAN ports, allowing the administrator to combine two LAN interfaces using link aggregation technology. If one link fails, the traffic will failover to maintain the network connection. Link aggregation also increases the traffic throughput by up to double the performance.

Regarding data storage reliability, Atlas OS™ uses NEXCOM RAID Damage Detection and Protection Technology to enhance protection against disk failures. The iNAS 330 supports up to three disks in a RAID setup that is configurable through the graphical UI. By default, the system will automatically determine the optimal setting based on the number of disks selected by the user. Users can still manually configure the RAID level and file system setup. For more details, please refer to the user manual.

Using RAID 5 with three disks is recommended because it has a higher capacity than RAID 1 and better fault tolerance than JBOD. If a disk gets damaged, user can recover the data by replacing the damaged disk with a new one.

Real-time information delivery is a highlight of the Atlas OS™. There are four thermal sensors in the iNAS 330, one for the CPU and one for each drive (three in total). Atlas OS™ detects the readings from these sensors and displays a graphical representation on the web UI for t