- Free 30-day Returns
Meet Your Seller
Darkside 4+4 EPS 12" (30cm) HSL Single Braid Extension Cable - White, 4+4-Pin CPU (DS-0524)
- Is your PSU cable set suffering from a terminal case of fugly?
- Why not spruce up your build with our fine selection of DarkSide PSU cable extensions.
- These spiffy DarkSide cables come in a variety of colors, designs and sizes for everyones perfect cable setup.
- These cable extensions are available for 24pin, 8-PIN EPS, 8-PIN/6+2-PIN PCI-E and 4-PIN molex PSU cables.
- Designed and produced in the distant magical land of Canada, these cables offer the absolute finest quality and functionality that could be desired by modders both professional and novice alike.
Any questions? Ask CelesteSM will help you find out quickly.
The DarkSide 4+4 EPS HSL extension cable is 12" (30 cm) long and sleeved in White single braid. It plugs in between the 8-pin EPS CPU power cable of the power supply and the CPU power socket of the motherboard, so the part of the cable run that shows in the case is neatly sleeved in the color of your build. HSL means Heat Shrink Less: the sleeving runs right into the connectors, without heatshrink at the ends.
Properties
- Type: Extension cable, male to female
- Connector: 8-pin EPS CPU power, 4+4 split
- Length: 12" (30 cm)
- Sleeving: DarkSide single braid, HSL (no heatshrink)
- Color: White
- Pieces in the pack: 1
Color where it shows
An extension cable plugs in between the 8-pin EPS CPU power cable of your power supply and the CPU power socket of the motherboard. The plain cable of the power supply stays out of sight behind the motherboard tray, and only the sleeved DarkSide extension is visible in the case. It is the easy way to bring color into a build without replacing the cables of the power supply.
4+4 split connector
One connector of the cable splits into two 4-pin halves. Together they make a full 8-pin EPS connector, and one half alone fits the 4-pin CPU power socket of older or smaller motherboards.
Heat Shrink Less (HSL)
HSL stands for Heat Shrink Less: this revision of the DarkSide cables has no heatshrink at the ends, the single braid sleeving runs right into the connector. DazMode calls the choice between this look and similar cables with heatshrink a matter of the modder's personal preference; HSL gives the clean, uninterrupted line of sleeve from connector to connector.
Single braid sleeving
Every wire is sleeved on its own (single braid) in DarkSide high density sleeving with a tight weave, so the wires lie neatly side by side and can be trained into clean, parallel runs. DarkSide cable combs are made for DarkSide extensions and hold the wires in line.
Male to female, universal
One end is a male connector that takes the cable of the power supply, the other a female connector that plugs into the CPU power socket of the motherboard. Standard connectors make the extension universal: it fits the standard 8-pin EPS CPU power cable of any power supply.
Technical data
- Brand: DarkSide by DazMode
- Type: Power supply extension cable
- Connector: 8-pin EPS CPU power, 4+4 split
- Gender: Male to female
- Pins: 8 (4+4)
- Length: 12" (30 cm)
- Sleeving: Single braid, every wire sleeved on its own
- Heatshrink: None (HSL, Heat Shrink Less)
- Sleeve color: White
Notes
- DarkSide makes this cable in several sleeve colors. This listing is the White version.
- Plug in and unplug the cable by the connector, not by the sleeved wires.
- DarkSide cable combs for this cable are sold separately.
In the box
- 1x Darkside 4+4 EPS 12" (30cm) HSL Single Braid Extension Cable - White
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory



