- Free 30-day Returns
Meet Your Seller
Darkside CONNECT Cable | 12" | 4-Pin Molex - Type 5 (DS-0370)
- Black sleeved Darkside CONNECT Type 5 single cable, 12" (30cm), from a 4-pin Molex to one CONNECT LED.
- Modular power cable for Darkside CONNECT LEDs and rigid LED strips.
- Power connector: 4-Pin Molex.
- Length: 12" (30cm).
Any questions? Ask CelesteSM will help you find out quickly.
The DarkSide CONNECT Type 5 is a 12" (30cm) single cable that powers DarkSide CONNECT LEDs and rigid LED strips. It connects one CONNECT LED to a 4-pin Molex peripheral connector of the power supply. The cable is fully sleeved in DarkSide Jet Black, like the wires of the DarkSide CONNECT lights.
Properties
- Type: DarkSide CONNECT power cable, Type 5
- Cable: Single cable
- Power side: 4-pin Molex peripheral connector
- LED side: 1x CONNECT connector, male
- Pass-through: No
- Length: 12" (30cm)
- Sleeving: DarkSide Jet Black
- Pieces in the pack: 1
Modular power for DarkSide lights
Every DarkSide CONNECT LED and CONNECT rigid LED strip ends in a short sleeved wire with a female CONNECT connector, and the power cable is a separate part. You pick the cable that fits your build: a fan header, a Molex line of the power supply, a splitter for several lights or an extension. If you later want to power the light another way, you change only the cable and keep the LED.
Where this cable goes
Plug the Molex connector onto a 4-pin Molex peripheral connector of the power supply, and the CONNECT plug into the light. The light then runs straight from the power supply, independent of the motherboard headers, and is on whenever the PC is on.
Short and long versions
DarkSide makes each CONNECT cable type in two lengths: the "s" types are 4" (10cm) long, the plain types 12" (30cm). This is the 12" Type 5; the same cable in 4" (10cm) is the Type 5s. When the light sits farther away, add a DarkSide CONNECT extension cable (Type 9, 9L or 9XL).
Technical data
- Model: DarkSide CONNECT Type 5
- Cable: Single cable
- Power side: 4-pin Molex peripheral connector
- LED side: 1x CONNECT connector, male
- Pass-through: No
- Length: 12" (30cm)
- Sleeving: DarkSide Jet Black
- Fits: DarkSide CONNECT LEDs and CONNECT rigid LED strips
Notes
- DarkSide CONNECT LEDs and LED strips are sold separately.
In the box
- 1x DarkSide CONNECT Cable | 12" | 4-Pin Molex - Type 5
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory





