- Free 30-day Returns
Meet Your Seller
Darkside 3-pin Quad Push-Pull Radiator Fan Power Y-Cable Splitter (8x Fans) - Jet Black, 75cm (DS-0101)
- For connection of 8x 3-Pin fans in push-pull on dual radiator to one power source connector (3-Pin) such as fan controller.
- Warning: Please consider your total fans wattage to be under your power source specs.
- Specification:
- Total lenght: ~ 75cm (30")
- Pre-sleeved
- Optimised for use on quad radiators
Any questions? Ask CelesteSM will help you find out quickly.
This DarkSide 3-pin radiator fan power splitter connects 8 fans in push-pull on a quad radiator to one 3-pin power source connector, such as a fan controller channel. The splitter is about 75 cm (30") long in total and comes pre-sleeved in DarkSide jet black sleeving, laid out for a quad radiator so the connectors land where the fans are.
Properties
- Type: 3-pin fan power splitter for 8 fans
- Input: 1x 3-pin fan connector
- Outputs: 8x 3-pin fan connector
- Made for: 8 fans in push-pull on a quad radiator
- Total length: about 75 cm (30")
- Sleeving: DarkSide, pre-sleeved, Jet Black
- Pieces in the pack: 1
Laid out for the radiator
In push-pull, one set of fans pushes air into the radiator and a second set on the other side pulls it out, so a quad radiator carries 8 fans. The splitter is optimized for use on quad radiators, so a single cable runs along the radiator and there is no tangle of separate Y-cables and extensions.
One controller channel for all fans
All 8 fans run from one 3-pin power source connector, for example a fan controller channel, so they share the same voltage and speed.
Mind the power rating
All 8 fans draw their power through the one input connector. Add up the wattage of all fans and make sure the total stays under the rating of the power source that feeds them.
Pre-sleeved
The splitter comes fully sleeved in DarkSide jet black sleeving with heatshrink at the connectors, so it matches DarkSide fan extensions and sleeved fan cables.
Technical data
- Brand: DarkSide
- Type: 3-pin radiator fan power Y-cable splitter
- Input connector: 3-pin fan
- Output connectors: 8x 3-pin fan
- Made for: 8 fans in push-pull on a quad radiator
- Total length: about 75 cm (30")
- Sleeving color: Jet Black
Notes
- DarkSide makes radiator splitters for 2 and 4 fans in a row (dual and quad radiators) and for 4, 6 and 8 fans in push-pull (dual, triple and quad radiators). This listing is the version for 8 fans in push-pull on a quad radiator.
In the box
- 1x Darkside 3-pin Quad Push-Pull Radiator Fan Power Y-Cable Splitter (8x Fans) - Jet Black
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory





