- Free 30-day Returns
Meet Your Seller
DarkSide CONNECT 3-Way Cable | 12" | 4-Pin Molex - Type 11 (DS-0396)
- Black sleeved DarkSide CONNECT Type 11 3-way cable, 12" (30cm), from a 4-pin Molex to three CONNECT LEDs
- Modular power cable for DarkSide CONNECT LEDs and rigid LED strips
- Black sleeved DarkSide CONNECT Type 11 3-way cable, 12" (30cm), from a 4-pin Molex to three CONNECT LEDs
- Power connector: 4-Pin Molex
- Length: 12" (30cm)
Any questions? Ask CelesteSM will help you find out quickly.
The DarkSide CONNECT Type 11 is a 12" (30cm) 3-way cable that powers DarkSide CONNECT LEDs and rigid LED strips. It splits a 4-pin Molex peripheral connector of the power supply into 3 CONNECT plugs, so three CONNECT LEDs run from one connection. The cable is fully sleeved in DarkSide Jet Black, like the wires of the DarkSide CONNECT lights.
Properties
- Type: DarkSide CONNECT power cable, Type 11
- Cable: 3-way cable
- Power side: 4-pin Molex peripheral connector
- LED side: 3x CONNECT connector, male
- Pass-through: No
- Length: 12" (30cm)
- Sleeving: DarkSide Jet Black
- Pieces in the pack: 1
Modular power for DarkSide lights
Every DarkSide CONNECT LED and CONNECT rigid LED strip ends in a short sleeved wire with a female CONNECT connector, and the power cable is a separate part. You pick the cable that fits your build: a fan header, a Molex line of the power supply, a splitter for several lights or an extension. If you later want to power the light another way, you change only the cable and keep the LED.
Where this cable goes
Plug the Molex connector onto a 4-pin Molex peripheral connector of the power supply, and the CONNECT plugs into the lights. All three lights then runs straight from the power supply, independent of the motherboard headers, and is on whenever the PC is on.
Short and long versions
DarkSide makes each CONNECT cable type in two lengths: the "s" types are 4" (10cm) long, the plain types 12" (30cm). This is the 12" Type 11; the same cable in 4" (10cm) is the Type 11s. When the light sits farther away, add a DarkSide CONNECT extension cable (Type 9, 9L or 9XL).
Technical data
- Model: DarkSide CONNECT Type 11
- Cable: 3-way cable
- Power side: 4-pin Molex peripheral connector
- LED side: 3x CONNECT connector, male
- Pass-through: No
- Length: 12" (30cm)
- Sleeving: DarkSide Jet Black
- Fits: DarkSide CONNECT LEDs and CONNECT rigid LED strips
Notes
- DarkSide CONNECT LEDs and LED strips are sold separately.
In the box
- 1x DarkSide CONNECT 3-Way Cable | 12" | 4-Pin Molex - Type 11
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory













