- Free 30-day Returns
Meet Your Seller
Darkside 4-Pin MOLEX HSL Extension Single Braid Cable Titanium Gray (DS-0962)
- This Revision of Dazmodes DarkSide cables features NO heatshrink (HSL Heat Shrink Less)
- With this design of single braid sleeving
- Dazmode/DarkSide have found ultimate preference with modders vs. similar cables with heatshrink.
- This Revision of Dazmodes DarkSide cables features NO heatshrink (HSL Heat Shrink Less).
- With this design of single braid sleeving.
Any questions? Ask CelesteSM will help you find out quickly.
The DarkSide 4-pin Molex HSL extension cable is 16" (40 cm) long and sleeved in Titanium Gray single braid. It plugs in between the 4-pin Molex cable of the power supply and the device (pump, fan hub, controller or drive), so the part of the cable run that shows in the case is neatly sleeved in the color of your build. HSL means Heat Shrink Less: the sleeving runs right into the connectors, without heatshrink at the ends.
Properties
- Type: Extension cable, male to female
- Connector: 4-pin Molex peripheral power
- Length: 16" (40 cm)
- Sleeving: DarkSide single braid, HSL (no heatshrink)
- Color: Titanium Gray
- Pieces in the pack: 1
Color where it shows
An extension cable plugs in between the 4-pin Molex cable of your power supply and the device (pump, fan hub, controller or drive). The plain cable of the power supply stays out of sight behind the motherboard tray, and only the sleeved DarkSide extension is visible in the case. It is the easy way to bring color into a build without replacing the cables of the power supply.
Heat Shrink Less (HSL)
HSL stands for Heat Shrink Less: this revision of the DarkSide cables has no heatshrink at the ends, the single braid sleeving runs right into the connector. DazMode calls the choice between this look and similar cables with heatshrink a matter of the modder's personal preference; HSL gives the clean, uninterrupted line of sleeve from connector to connector.
Single braid sleeving
Every wire is sleeved on its own (single braid) in DarkSide high density sleeving with a tight weave, so the wires lie neatly side by side and can be trained into clean, parallel runs. DarkSide cable combs are made for DarkSide extensions and hold the wires in line.
Male to female, universal
One end is a male connector that takes the cable of the power supply, the other a female connector that plugs into the device (pump, fan hub, controller or drive). Standard connectors make the extension universal: it fits the standard 4-pin Molex cable of any power supply.
Technical data
- Brand: DarkSide by DazMode
- Type: Power supply extension cable
- Connector: 4-pin Molex peripheral power
- Gender: Male to female
- Pins: 4
- Length: 16" (40 cm)
- Sleeving: Single braid, every wire sleeved on its own
- Heatshrink: None (HSL, Heat Shrink Less)
- Sleeve color: Titanium Gray
Notes
- DarkSide makes this cable in several sleeve colors. This listing is the Titanium Gray version.
- Plug in and unplug the cable by the connector, not by the sleeved wires.
- DarkSide cable combs for this cable are sold separately.
In the box
- 1x Darkside 4-Pin MOLEX HSL Extension Single Braid Cable - Titanium Gray
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory



