Meet Your Seller
Darkside 45cm (18") SATA 2.0/3.0 7P 180° to 180° Cable with Latch - Gun Metal (DS-0912)
- Coming to you from the exotic distant reaches of Canada, these SATA Data cables are available in a variety of colors and designs
- These extension cables are available in sizes ranging from 12 to 18 with an option of 180 degree or 90 degree connectors for your unique system requirements
- Sleeved with the highest quality in mind, these cables are sure to attract attention amongst your party of modding pals.
- Coming to you from the exotic distant reaches of Canada, these SATA Data cables are available in a variety of colors and designs.
- These extension cables are available in sizes ranging from 12 to 18 with an option of 180 degree or 90 degree connectors for your unique system requirements.
Any questions? Ask CelesteSM will help you find out quickly.
This DarkSide SATA 3.0 data cable connects a drive to a SATA port with straight 180° connectors on both ends. It is 45 cm (18") long, both 7-pin connectors lock in with a latch, and the whole cable is sleeved in DarkSide HD sleeving in gun metal for a clean, color matched build.
Properties
- Type: SATA data cable, 180° to 180°
- Standard: SATA 2.0 / 3.0 (up to 6 Gbps)
- Connectors: 2x 7-pin SATA data, female, with latch
- Length: 45 cm (18")
- Sleeving: DarkSide HD, Gun Metal
- Pieces in the pack: 1
Fast SATA 3.0 data link
The cable carries the 7-pin SATA data signal between a drive and a SATA port on the motherboard or a controller card. DarkSide makes it for SATA 2.0 and SATA 3.0: it runs at the full 6 Gbps of SATA 3.0 and works with SATA 2.0 (3 Gbps) drives and ports, so it suits hard drives, SSDs and optical drives alike.
Latching connectors
Both 7-pin connectors have a locking latch. The latch clicks into the port and keeps the plug from working loose when you route other cables or move the drive cage. Press the latch while you pull the plug to release it.
Straight connectors on both ends
Both ends have straight 180° connectors that plug in straight, the most common layout for motherboard SATA ports that face out of the board and for drives with open space behind the port.
Sleeved to match your build
The cable is sleeved end to end in DarkSide HD sleeving, finished with heatshrink at each connector, so the SATA run matches the DarkSide power cable extensions and sleeved cables in the same color.
Technical data
- Brand: DarkSide
- Type: SATA data cable
- Standard: SATA 2.0 (3 Gbps) and SATA 3.0 (6 Gbps)
- Connector 1: 7-pin SATA data, straight (180°), with latch
- Connector 2: 7-pin SATA data, straight (180°), with latch
- Length: 45 cm (18")
- Sleeving color: Gun Metal
- UV: Not UV reactive
Notes
- DarkSide makes this cable in 30 cm (12"), 45 cm (18") and 60 cm (24") lengths and in several sleeving colors, and also with one 90° angled connector. This listing is the 45 cm Gun Metal 180° to 180° version.
In the box
- 1x Darkside 45cm (18") SATA 2.0/3.0 7P 180° to 180° Cable with Latch - Gun Metal
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory




