- Free 30-day Returns
Meet Your Seller
Darkside 2-Way CONNECT to SATA Splitter Cable | 10cm - Type 17, 5-Pin SATA, Black (DS-1020)
- DarkSide Connect is a universal power extension cable system
- It allows selecting the best power cable option for your Darkside rigid LED. It also makes it easy to change to another type of connectivity without replacing entire LED product.
- DarkSide Connect is a universal power extension cable system.
- It allows selecting the best power cable option for your Darkside rigid LED.
- It also makes it easy to change to another type of connectivity without replacing entire LED product.
Any questions? Ask CelesteSM will help you find out quickly.
This DarkSide CONNECT cable powers two DarkSide CONNECT LEDs from a SATA power connector of the power supply. DarkSide CONNECT is a universal power extension cable system for DarkSide rigid LED strips and modular LEDs: you pick the power cable that suits your build, and you can change to another type of connection later without replacing the LED itself. The cable has two DarkSide CONNECT male plugs (dual) on the LED side and a SATA power connector on the power side, is 4" (10 cm) long and sleeved in DarkSide jet black.
Properties
- Type: DarkSide CONNECT power cable, Type 17
- LED side: 2x DarkSide CONNECT male (dual)
- Power side: SATA power connector
- Length: 4" (10 cm)
- Sleeving: DarkSide, Jet Black
- Pieces in the pack: 1
Power straight from the power supply
The SATA power connector plugs into a SATA power cable of the power supply, so the LEDs do not need a fan header, a Molex connector or a controller channel. Use it when SATA power is the closest or the only free connection near the lights.
One LED system, many cable options
Every DarkSide CONNECT LED uses the same CONNECT plug, and the cable decides how it gets its power: 3-pin fan header, 4-pin Molex, SATA, with or without pass-through, as a single cable, a Y-cable or a 3-way cable, in short and long versions. Swap the cable and the LED stays in place. The wide range of DarkSide CONNECT cables helps to keep cable clutter down in a custom system.
Two lights on one connector
The 2-way splitter connects two LEDs to one SATA power connector of the power supply, for example two rigid LED strips at the top and the bottom of the case. Both lights run from the same connector.
Technical data
- Brand: DarkSide
- Type: DarkSide CONNECT to SATA cable, Type 17
- LED connector side: 2x DarkSide CONNECT male (dual)
- Power source side: SATA power connector
- Length: 4" (10 cm)
- Sleeving color: Jet Black
Notes
- DarkSide makes the CONNECT to SATA cable as a single cable and as a 2-way Y-cable, each in 4" (10 cm) and 12" (30 cm) lengths. This listing is the 4" (10 cm) splitter cable version.
- The cable fits DarkSide CONNECT LEDs only; it does not fit plain 3-pin, 4-pin RGB or other LED plugs.
In the box
- 1x Darkside 2-Way CONNECT to SATA Splitter Cable | 10cm - Type 17
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory






