ADT-Link USB3.1 GEN2 Type-E to TypeE Extension Cable Internal USB 3.1 E Type Male to Female Cable w Screw Holes for Motherboard(F9T-F6A)(10cm)

ADT-Link USB 3.1 GEN2 Type-E to Type-E Extension Cable Internal USB 3.1 E Type Male to Female Cable w Screw Holes for Motherboard
Detail:
Brand: ADT-Link
Quantity: 1pc
Product name: USB 3.0 USB-E to built-in 19/20P extension cable
Wire length: 5-100cm (If you need other lengths, please contact us to change the price, thank you! )
Adaptation range: USB 3.1 built-in 20P type-E to type-E extension
Speed bandwidth: USB 3.1 standard (10G/bps is supported within 30cm, 10G/bps is not supported after the USB cable is connected in series)
Current capacity: 3A (measured to support 3A within 50cm, 1.5A within 1 meter)
Product application: Built-in USB 3.1 20-pin typ-e interface extension cable on the motherboard.
Restrictions on use: Two or more USB cables are connected in series with signal attenuation, so it can only reach 5G gen1, but cannot reach 10G gen2
Description of wire length:
Product advantages:

1. Use German patent imported wire, support USB 3.1 10G/bps speed within 30cm

2. Cable length advantage, from 3 cm to 3 meters can be customized

3. The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable

4. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened to transmit current up to 3A.