AB01 Graphics Card 6PIN to SATA Hard Drive Power Cable, 12V Step-Down Voltage Stabilization PCIe 6Pin to 15Pin SATA Power Adapter Cord for 2.5/3.5 Inch SATA HDD SSD Storage Power Supply

AB01 6PIN graphics card to SATA hard drive power supply cable adopts built-in step-down voltage stabilization module, solving the problem that the PCIe 6PIN interface only outputs single 12V power and cannot directly supply power to SATA hard drives. It converts power from spare PCIe 6Pin graphics card power connectors into standard 12V and 5V dual voltage required by SATA storage devices.

This power adapter cable makes full use of redundant PCIe 6PIN power ports on your power supply. When your PSU runs out of native SATA power outlets, you can power additional 2.5-inch SATA SSD and 3.5-inch SATA mechanical hard disks without replacing power supply.

Equipped with professional voltage stabilization and overcurrent protection circuit. It keeps output voltage steady during hard drive startup and continuous operation, avoids hard disk freezing, recognition failure or abnormal reboot caused by voltage fluctuation. Premium oxygen-free copper wiring minimizes power loss. Locking molded connectors ensure tight connection and prevent accidental disconnection under chassis vibration.

Simple plug-and-play installation without extra drivers. Perfect for DIY PC storage expansion, multi-disk workstation assembly, mining machine hard disk expansion, surveillance host and small server hardware modification.

Important Notes:

1. This cable is designed for PCIe 6PIN (Graphics Card port) INPUT to SATA hard drive OUTPUT. Reverse connection is prohibited.
2. Please confirm the total power consumption of your hard drive and ensure your power supply has sufficient power margin before use.
3. Not applicable for high-power enterprise hard drives exceeding rated load.