4 Pack 0.5M 18AWG Right Angle DC 5.5x2.1mm Male Pigtail Cable, 90 Degree DC5521 Plug to 2-Pin Bare Open End Wires, DIY Repair Replacement Power Cord for Router CCTV Camera LED Strip DC Power Project W

This pack contains 4 pieces of right-angle DC 5.5*2.1mm male pigtail power cables, specially designed for DIY circuit modification, power cord broken repair and custom DC power wiring projects. The plug adopts a 90-degree elbow right-angle structure, which can fit closely against the device shell, effectively preventing long-term wire bending, tension and fracture at the DC jack root, greatly extending the service life of the power connection part, especially suitable for narrow installation spaces on routers, cameras and embedded control boards.

Built with 18AWG heavy-duty internal copper conductors, the wire can bear larger working current compared with thinner wires, reducing line power loss and temperature rise during continuous load operation, eliminating hidden dangers of overheating for low-voltage equipment. Each cable measures 0.5 meters (1.6 feet) in total length, and the tail end is pre-stripped to expose two independent bare copper wires, allowing users to freely solder to power modules, connect terminal blocks, or link directly to power adapters and battery packs without extra stripping work.

The DC5521 5.5mm outer diameter × 2.1mm inner diameter barrel plug is the most universal DC power interface for countless small electronics, including wireless routers, optical modems, security IP cameras, LED light strips, mini cooling fans, single-board microcontrollers, portable speakers and monitoring power splitters.

The outer PVC insulation layer features excellent wear resistance, bending resistance and low-temperature toughness, suitable for indoor fixed wiring and electronic equipment internal wiring environments. All plugs are injection molded tightly with strain relief design to prevent wire pulling off from the connector during repeated plugging and unplugging.

This 4-piece bulk set offers high cost performance for maintenance technicians, electronic hobbyists, laboratory test wiring and factory equipment after-sales replacement. Please confirm the positive and negative polarity before soldering and connection to avoid reverse voltage burning out your connected electrical modules.