PWM Fan Splitter 4pin Adapter Cable 1 to 1 Computer CPU Cooler Fan Splitter PC Chassis Fan Extension Power Cable(27cm)

[Product name]: 4Pin fan interface extension cable (with braided net)
[Product length]: full length 27CM
[Wire Model]: 1007 26AWG
[Insulation material]: PVC insulation
[Conductor specifications]: 7/ 0.14TS
[Conductor material]: tinned copper
[Outer diameter of wire]: OD 1.3 mm
[Rated temperature]: 70
[Wire color]: color
[Appearance color]: black
[Product Interface]: One end of the motherboard is a small 4pin connector, and the other end is a fan small 4Pin interface (support 3Pin)
[Product function]: One or more fans share one interface
Purpose: When the CPU fan (4Pin) cable is not long enough and the motherboard interface is not enough, it supports 3Pin. Mainly extend and expand the interface.
important:
1 to 1 In order to avoid signal conflicts for simultaneous speed measurement, as long as there are 4 needles (supporting speed measurement and temperature control), the other interfaces are all 3 needles.
reason:
Because even fans of the same model may have different speeds, if you use the motherboard to measure more than two fans with different speeds at the same time, the motherboard will go on strike, resulting in the failure of the temperature control and speed measurement functions. Therefore, one (yellow) speed measurement line of other interfaces must be removed, and only the speed signal of one fan is retained. Other fans can also have the effect of temperature control and speed regulation.