JAENFONG PWM Fan Splitter Cable 1 to 2, Black Sleeved 2 Way PC Fan Extension Cable Compatible with Computer 3 Pin & 4 Pin CPU / Case Fans, 10 Inch, 2 Pack

PWM FAN SPLITTER Y-CABLE connects 2 computer PWM fans to a single motherboard fan header;

1 to 2 fan converter cable connects an additional fan to increase airflow in your computer case

MOBO 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans;

Fans can spin at the same speed using software from a motherboard equipped with PWM control

MASTER/SLAVE FAN PLUGS have a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan;

3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans

3-PIN & 4-PIN FAN COMPATIBLE with popular brands of computer case cooling fans

Note:

3pin fans are run in full speed, no PWM function

Only the fan on 4-pins connector is used for monitoring.

All connected fans are following the same PWM signa, speed control is the same for all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE, etc

PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. Please carefully consult your motherboard documentation in this respect.