JAENFONG COMPATIBLE AUTOGUIDING ST4 6P6C RJ-12 CABLE FOR IOPTRON ST-4 AUTOGUIDING ADAPTER #8427 TO EQUATORIAL MOUNT HBX PORT Cable length:5M

COMPATIBLE AUTOGUIDING ST4 6P6C RJ-12 CABLE FOR IOPTRON ST-4 AUTOGUIDING ADAPTER #8427 TO EQUATORIAL MOUNT HBX PORT

ST-4 Adapter has two ports: iOptron Port and Guide Port. Connect one end of supplied 6P4C coiled cable to the iOptron Port of the adapter. Plug the other end into an available HBX port (Port A or Port B socket on the mount. ) Connect Guide Port to ST-4 ompatible

autoguiding equipment using a 6P6C RJ-12 cable (not included).

Note: Do not plug ST-4 autoguiding cable (which also has a 6 pin RJ plug cable) into GoToNova hand control port, neither the HBX on an iOptron mount. This could damage hand controller, mount control board or ST-4 autoguiding equipment.

Package Contents:

1 X ST4 Cable

Length: 1.0M / 3.3FT, 1.8M /6FT, 3.0M /10FT, 5.0M / 16.4FT (Approx. )

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

If you have special requirements, such as cable length, wire gauges and pinouts, please consult to me online or leave me a message.

If you receive the goods, and have any dissatisfaction or need assistance, please feel free to contact me or leave me a message.

ST4 Compatible Cable Auto Guide Cable, Celestron SBIG SG-4 Cable, auto guider RJ11 RJ12 Cable, ST4 guide cable, ST4 Compatible Autoguider Cable, ST4 guide star data cable, ST4 for ZWO Zhenwang and QHY guide star cameras, ST4 guide cable for QHY5-II QHY5 etc. CCD data cableguider rj11 rj12 kablecompatible autoguider cable kablecompatible autoguider kableguide cable kableguider rj11 kable