PCIe 5.0 12VHPWR Extension Cable 16AWG 600W ATX 3.0 16 Pin (12+4) Female to Male GPU Power Extender for RTX 5090/5080/4090/4080/4070 Ti/3090 Ti, Compatible with MSI Gigabyte GameMax Thermaltake PSU

1. EXTEND YOUR 12VHPWR CABLE SOLVE TIGHT ROUTING ISSUES This is a Female to Male extension cable simply plug your PSUs existing 12VHPWR cable into the female end, then plug the male end into your GPU. Perfect for cases where your PSU cable is too short or requires sharp bends to reach the GPU port. Eliminates cable strain and improves airflow in compact builds.
2. 600W PCIe 5.0 POWER DELIVERY 16AWG PREMIUM CONSTRUCTION Built with highquality 16AWG tinned copper wire, capable of delivering up to 600W of stable power for the most demanding GPUs. Premium 12VHPWR connectors feature highcurrent terminals rated for reliable power delivery. The black sleeved jacket provides a professional, abrasionresistant finish.
3. ATX 3.0 & PCIe 5.0 COMPLIANT 12V-2x6 READY Fully compliant with ATX 3.0 and PCIe 5.0 standards. Compatible with both 12VHPWR and the updated 12V-2x6 connector standard. The 12V-2x6 standard features shorter sense pins that ensure full insertion before power is delivered a critical safety improvement.
4. WIDE COMPATIBILITY For MSI, GIGABYTE, GAMEMAX, THERMALTAKE & MORE Works with power supplies from major brands including MSI (MEG Ai1300P, MPG A1000G, A850G), Gigabyte (AORUS series), GameMax, and Thermaltake (GF3 750W-1600W, SFX 750W-1000W). Compatible with all PSUs that have a native 12VHPWR/12V-2x6 output.
5. CRITICAL SAFETY RULES MUST FOLLOW 1) Fully seat the connector push straight and firmly until you hear a CLICK; 2) Verify NO GAP remains between the connector and socket incomplete insertion is the #1 cause of connector failure; 3) Do NOT bend the cable within 35mm (1.4 inches) of the connector; 4) Regularly inspect connectors for signs of melting or discoloration.

Is your PSUs native 12VHPWR cable too short to reach your GPU comfortably? Are you forced to bend the cable sharply near the connector, risking damage or poor contact?

Our 12VHPWR Female to Male Extension Cable is the solution. Simply plug your PSUs existing 12VHPWR cable into the female end, then plug the male end directly into your GPU. This adds extra length for clean cable routing, eliminates sharp bends, and improves airflow in your case.

Built with 16AWG tinned copper wire and rated for 600W of continuous power, this extension cable delivers reliable power to the most demanding GPUs RTX 4090, 4080, 4070 Ti, 3090 Ti, and nextgen RTX 50 series-.

GPU Compatibility:

1. For NVIDIA RTX 50 Series: 5090, 5080, 5070 Ti
2. For NVIDIA RTX 40 Series: 4090, 4080, 4070 Ti, 4070
3. For NVIDIA RTX 30 Series: 3090 Ti
4. Any GPU with 12VHPWR/12V-2x6 (12+4) power port

Power Supply Compatibility:

1. MSI: MEG Ai1300P, MPG A1000G, A850G-8
2. Thermaltake: GF3 750W-1600W, SFX 750W-1000W-8
3. Gigabyte: AORUS series
4. GameMax: Compatible models with 12VHPWR output
5. Other Brands: Any PSU with native 12VHPWR/12V-2x6 output

READ BEFORE INSTALLATION Incomplete insertion is the #1 cause of 12VHPWR connector failure.

Step 1: Connect to Your PSU Cable Plug your PSUs existing 12VHPWR cable into the Female end of this extension cable. Ensure a fully seated connection.

Step 2: Connect to Your GPU Push the Male end straight and firmly into your GPUs power port until you hear a distinct CLICK. The connector must be completely flush with the GPUs port.

Step 3: Verify NO GAP After insertion, visually check that no gap remains between the connector housing and the GPU socket. If you see any gap, the connector is not fully seated DO NOT power on your system reinsert immediately-.

Additional Safety Tips:

1. Do NOT bend the cable within 35mm (1.4 inches) of any connector
2. Periodically inspect connectors for signs of melting or discoloration
3. If you notice any abnormality, power down immediately