ATX 4 Pin to CPU 8 Pin Power Adapter Cable 4 Pin Female to 8 Pin (4+4 Detachable) Male EPS-12V Converter Extension for Motherboard, 18AWG Sleeved 9.5-inch (24cm)

1. CONVERT 4PIN PSU TO 8PIN MOTHERBOARD BREATHE NEW LIFE INTO OLDER POWER SUPPLIES This adapter cable converts your power supplys 4pin ATX 12V connector into an 8pin EPS12V CPU power connector. Perfect for using an older power supply (that only has a 4pin CPU connector) with a modern motherboard that requires an 8pin or 4+4pin CPU power connection. Save the cost of upgrading your entire power supply.
2. 4+4 DETACHABLE DESIGN UNIVERSAL MOTHERBOARD COMPATIBILITY Features an 8pin (4+4) detachable male connector. Use it as a full 8pin EPS12V connector for modern motherboards, or simply slide apart to create a 4+4 pin configuration for motherboards that require a 4pin CPU power connection. One cable covers both 4pin and 8pin motherboard CPU power needs.
3. 100% FOR MOTHERBOARD CPU POWER ONLY CRITICAL SAFETY WARNING This cable is exclusively designed for motherboard CPU power (EPS12V). DO NOT use it to power a graphics card (PCIe/GPU). The connector is keyed for EPS12V (CPU), not PCIe. Using it on a GPU will cause permanent damage and void any warranty. The 8pin end and the 4+4pin end cannot be used interchangeably the 4pin female end goes to the PSU, the 8pin (4+4) male end goes to the motherboard.
4. PREMIUM 18AWG CONSTRUCTION & SLEEVED DESIGN Built with highquality 100718AWG tincoated copper wire for stable power delivery and minimal voltage drop. Rated for 400W power delivery. The durable black nylon sleeving provides a clean, professional appearance and protects against abrasion, making cable management easy.
5. OPTIMAL 9.5INCH (24CM) LENGTH Total length of 9.5 inches (24cm) provides just enough reach for routing inside midtower and fulltower cases, with minimal slack for clean cable management. Compatible with all power supply types ATX, SFX, fanless PSUs.

Have you recently upgraded to a new motherboard that requires an 8pin CPU power connector, but your trusty older power supply only has a 4pin ATX 12V connector?- Instead of spending money on a new power supply, this ATX 4 Pin to CPU 8 Pin Adapter Cable is the simple, costeffective solution-2.

This converter cable takes the 4pin ATX 12V output from your power supply and converts it into an 8pin (4+4 detachable) EPS12V connector that plugs directly into your motherboards CPU power port--10. The 4+4 detachable design means it works with both 4pin and 8pin CPU power sockets on motherboards-.

This cable is exclusively designed for motherboard CPU power (EPS12V). It is NOT for graphics cards (PCIe/GPU)-10-11. The 8pin connector on this cable is keyed for CPU power, not PCIe-. Using it on a GPU will cause immediate and permanent damage to your graphics card, power supply, or both-.

Please verify your motherboards CPU power connector type before ordering. This cable works with motherboards that have:

1. 8pin +12V CPU power socket use the full 8pin connector
2. 4pin +12V CPU power socket split the 4+4 connector into two 4pin sections and use one
3. 8+4pin or 8+8pin CPU power sockets use for the primary 8pin connection

Step 1: Locate the 4pin CPU power cable from your power supply.

Step 2: Plug the 4pin female end of this adapter securely into your PSUs 4pin CPU cable.

Step 3: For an 8pin motherboard CPU socket, plug the 8pin male end directly into the motherboard. For a 4pin motherboard CPU socket, slide the 4+4 connector apart and use one 4pin section.

Step 4: Ensure all connections are fully seated you should feel a slight click when properly connected.