24 Pin to 10 Pin ATX Power Adapter Cable for Lenovo IBM Motherboard 18AWG Braided Sleeved PSU Converter, Replace Proprietary Power Supply with Standard ATX, 12-inch (30cm)

1. CONVERT STANDARD ATX PSU TO LENOVO 10-PIN MOTHERBOARD Lenovo and IBM desktop motherboards use a proprietary 10-pin main power connector instead of the standard 24-pin ATX interface. This adapter cable bridges the gap, converting a standard 24-pin ATX power supply output to a Lenovo-compatible 10-pin connector. Replace expensive, underpowered Lenovo OEM power supplies with affordable, high-performance standard ATX power supplies.
2. WIDE COMPATIBILITY LENOVO THINKCENTRE/THINKSTATION/IDEACENTRE Compatible with Lenovo motherboards featuring a 10-pin power port. Works with ThinkCentre (M series, E series), ThinkStation (P series), IdeaCentre series, and IBM/Lenovo servers. Compatible chipsets include H110, B150, H170, B250, Z370, Q150, Q170, and more. Please verify your motherboard has a 10-pin power port before ordering this adapter is for 10-pin motherboards only.
3. PREMIUM 18AWG CONSTRUCTION SAFE & RELIABLE Built with high-quality 1007-18AWG tin-coated copper wire for stable power delivery and minimal voltage drop. Rated for up to 1000W power capacity. The braided sleeving provides superior protection against abrasion and heat, ensuring long-term durability and a clean, professional appearance.
4. OPTIMAL 12-INCH (30CM) LENGTH PERFECT FOR SFF/TINY CHASSIS Total length of 12 inches (30cm) provides ample reach for routing inside Small Form Factor (SFF), Tiny, and Mini-Tower chassis without excess slack. The compact length is ideal for tight Lenovo cases where cable management is critical.
5. ELIMINATES OEM PSU RESTRICTIONS UPGRADE WITH CONFIDENCE Lenovo proprietary power supplies are often underpowered (as low as 180W-240W) and expensive to replace. This adapter allows you to use any standard ATX power supply up to 1000W, enabling upgrades to high-performance GPUs, additional storage, and more powerful CPUs
6. IMPORTANT OPERATION NOTE SHUTDOWN BEHAVIOR When using this adapter with Lenovo motherboards, the power supply will remain on (fan may continue spinning) even after the computer shuts down. This is normal behavior due to Lenovos proprietary power management design. To fully power off the PSU, you must unplug the AC power cord this is not a defect, its how Lenovo motherboards are designed.

Lenovo and IBM desktop motherboards and servers use a proprietary 10-pin main power connector, rather than the standard 24-pin ATX interface used by most motherboards-. This means you cannot simply use a standard, more affordable, higher-wattage ATX power supply to replace the original Lenovo power supply.

This 24-Pin to 10-Pin ATX Power Adapter Cable solves this problem perfectly. It converts the standard 24-pin ATX power supply output to the Lenovo proprietary 10-pin motherboard power connector--5, allowing you to:

1. Replace expensive, underpowered Lenovo OEM power supplies with standard ATX power supplies-
2. Achieve higher power output (supports up to 1000W power supplies)-5
3. Upgrade your system with high-performance GPUs, additional storage, and more powerful CPUs
4. Avoid purchasing costly Lenovo proprietary replacement power supplies

Why Lenovo Uses a 10-Pin Connector

Lenovo, like many major OEMs (Dell, HP), uses proprietary power connectors on their motherboards to lock customers into their ecosystem. The 10-pin connector is physically different from the standard 24-pin ATX connector and uses a different pinout-. This adapter is specifically wired to match the Lenovo 10-pin pinout, ensuring safe and reliable power delivery.

Before purchasing, please confirm your Lenovo motherboard has a 10-pin power connector.

NOT Compatible With:

1. Motherboards with standard 24-pin ATX power connectors
2. Motherboards with 14-pin Lenovo connectors (different pinout)
3. Motherboards with 6-pin Dell/HP proprietary connectors
4. Any non-Lenovo/IBM motherboards

Please check the 4th product image to confirm your motherboard connector type before ordering.

Before You Start:

1. Ensure your replacement ATX power supply is turned off and unplugged
2. Verify your Lenovo motherboard has a 10-pin power connector (check 4th product image)

Step 1: Connect to Power Supply

Learn more about the Detailed Specifications