Mini 8 Pin to 2X SATA Power Adapter Cable for Dell OptiPlex 3020 5040 7020 9020 Motherboard ATX 8 Pin to Dual Right-Angle 15 Pin SATA Hard Drive HDD SSD Power Cord, 14.5-inch (37cm)

1. DELL OPTIPLEX 3020/5040/7020/9020 EXCLUSIVE This adapter cable is specifically designed for Dell OptiPlex 3020, 5040, 7020, and 9020 series (Mini Tower models) that use a proprietary Mini 8-pin motherboard power connector to supply SATA power to hard drives and SSDs. It is NOT compatible with standard ATX motherboards, other Dell models (including SFF versions), or other brands please verify your system model and motherboard port type before ordering.
2. 2X SATA OUTPUT POWER TWO DRIVES SIMULTANEOUSLY The Mini 8-pin female connector on the motherboard side splits into two right-angle SATA 15-pin power connectors on the drive side. This allows you to power both a boot SSD and a storage HDD, or two hard drives simultaneously, without needing additional adapters or splitters. Perfect for upgrading to SSD + HDD dual-drive setups.
3. RIGHT-ANGLE SATA CONNECTORS IDEAL FOR TIGHT CASES The 90-degree angled SATA connectors are specifically designed for Dell OptiPlex Mini Tower chassis where space is limited. The right-angle design allows for a clean, low-profile connection that fits flush against the drive, reducing cable strain and improving airflow.
4. PREMIUM 18AWG CONSTRUCTION SAFE & RELIABLE Built with high-quality 1007-18AWG tin-coated copper wire for stable power delivery and minimal voltage drop. The 14.5-inch (37cm) total length provides ample reach for clean routing inside the OptiPlex chassis without excess cable clutter.
5. COMPATIBLE WITH POPULAR UPGRADE SCENARIOS Ideal for: Adding a second hard drive to your OptiPlex for expanded storage Upgrading to SSD for faster boot times and system performance Replacing a lost or damaged original SATA power cable Building a home server or NAS using Dell OptiPlex hardware
6. PLUG-AND-PLAY EASY INSTALLATION No drivers or software required. Simply connect the Mini 8-pin male end to the matching port on your Dell OptiPlex motherboard, and connect the two right-angle SATA female ends to your hard drives or SSDs. The connectors are keyed to fit only one way do not force them.
7. CRITICAL COMPATIBILITY NOTE This cable uses a Dell proprietary Mini 8-pin connector. It is ONLY compatible with Dell OptiPlex 3020/5040/7020/9020 Mini Tower models that have the Mini 8-pin power socket on the motherboard. NOT compatible with: Dell OptiPlex SFF (Small Form Factor) models Dell OptiPlex 3040/3050/3060/5050/5060/7040/7050/7060 series Standard ATX motherboards or power supplies Other brands or generic PC builds

Are you looking to add a second hard drive, upgrade to an SSD, or replace a lost SATA power cable in your Dell OptiPlex 3020, 5040, 7020, or 9020? This Mini 8 Pin to 2X SATA Power Adapter Cable is the perfect solution.

Dell OptiPlex 3020/5040/7020/9020 series motherboards use a proprietary Mini 8-pin power connector to supply power to SATA drives, rather than the standard SATA power cables found in most PCs-. This adapter cable bridges that gap, converting the motherboards Mini 8-pin port into two standard right-angle SATA 15-pin power connectors-.

What This Cable Does:

Component Connection

Connector A(Motherboard Side) Mini 8-pin Male connects to Dell OptiPlex motherboards proprietary power port

Connector B(Drive Side) 2x SATA 15-pin Female (Right-Angle) connects to standard SATA hard drives or SSDs

Compatibility Dell OptiPlex 3020/5040/7020/9020 Mini Tower ONLY

Why You Need This Cable:

1. Add a second drive The dual SATA outputs let you power both a boot SSD and a storage HDD
2. Upgrade to SSD Replace your old mechanical drive with a fast SSD for better performance
3. Replace lost/damaged cable Original Dell SATA power cables are hard to find and expensive
4. Build a budget NAS Turn your old OptiPlex into a home server with extra storage

This cable is ONLY compatible with specific Dell OptiPlex models.

Compatible With:

1. Dell OptiPlex 3020 Mini Tower (MT)
2. Dell OptiPlex 5040 Mini Tower (MT)
3. Dell OptiPlex 7020 Mini Tower (MT)
4. Dell OptiPlex 9020 Mini Tower (MT)
5. Motherboards with the Mini 8-pin SATA power socket (not standard 24-pin ATX)

NOT Compatible With:

1. Dell OptiPlex Small Form Factor (SFF) models these use a different power connector
2. Dell OptiPlex 3040/3050/3060/5050/5060/7040/7050/7060 series
3. Standard ATX motherboards or power supplies
4. Other Dell models (Precision, Vostro, Inspiron without confirmed compatibility)
5. Other brands (HP, Lenovo, etc.)