ATX CPU 8 Pin (4+4) Extension Cable Male to Female 12V Power Cord for PSU and Motherboard, Detachable 4+4 Pin for 4-Pin or 8-Pin Boards, 9.5-inch (24cm) 18AWG (2-Pack)

1. CPU 8 PIN EXTENSION CABLE FLEXIBLE ROUTING & CLEAN CABLE MANAGEMENT This extension cable provides a convenient solution for extending the connection from your power supply to the motherboard CPU power port. It adds 9.5 inches (24cm) of extra length, making it easier to route cables behind the motherboard tray for a clean, professional-looking build. Perfect for full-tower cases, custom PC builds, and improving airflow.
2. DETACHABLE 4+4 PIN DESIGN COMPATIBLE WITH 4-PIN & 8-PIN MOTHERBOARDS Features an ATX 12V 8-pin (4+4) male connector that can be used as a full EPS ATX 8-pin or split into two P4 ATX 4-pin sections. Simply slide the 4-pin section on or off to match your motherboards CPU power socket whether it requires a 4-pin, 8-pin, or 4+4-pin configuration. This design provides maximum compatibility across a wide range of motherboards.
3. PREMIUM 18AWG CONSTRUCTION SAFE & RELIABLE Built with high-quality 18AWG tin-plated copper wire for stable power delivery and minimal voltage drop. The durable braided sleeve enhances cable management, protects against abrasion, and provides a sleek, professional appearance. Rated temperature: 80°C; Rated voltage: 300V. Each cable is factory-tested for reliability and performance.
4. FOR CPU POWER ONLY CRITICAL SAFETY WARNING This cable is exclusively designed for motherboard CPU power (EPS/ATX 12V). DO NOT use it with graphics cards (PCIe) the connectors are keyed differently and using it on a GPU will cause permanent damage. Please verify your motherboard and power supply have ATX 8-pin (male) or ATX 4-pin ports before ordering.
5. PLUG-AND-PLAY TOOL-FREE INSTALLATION No drivers or software required simply connect the male end to your power supplys CPU 8-pin cable and the female end to your motherboards CPU power port. The connectors feature a safety lock to prevent accidental disconnection. The 8-pin male can be disassembled into two 4-pin males, realizing 8-pin power interface to connect 4-pin or 8-pin motherboard sockets.
6. OPTIMAL 9.5-INCH (24CM) LENGTH & 2-PACK VALUE Total length of 9.5 inches (24cm) provides just enough reach for routing in mid-tower and full-tower cases without excessive slack. Two cables per pack provide value for users building a single PC (spare cable) or multiple systems.
7. KIT INCLUDES 2x CPU 8 Pin Extension Cables (4+4 Male to Female, 9.5-inch / 24cm, 18AWG)

Is your PSUs CPU power cable too short to reach the motherboard CPU power port in your case? Are you tired of stretching cables across your motherboard or struggling with tight cable routing?

The ATX CPU 8 Pin (4+4) Extension Cable is the simple, cost-effective solution. This 9.5-inch (24cm) extension adds just the right amount of length to connect your PSU to the motherboard CPU power port no stretching, no stress, no compromises.

The Problem: Many modern PC cases have bottom-mounted power supplies, while the CPU power port is located at the top of the motherboard-. The CPU power cable that comes with your PSU is often too short to route cleanly behind the motherboard tray, forcing you to stretch it across the board or leave it hanging messily.

The Solution: This 9.5-inch extension cable bridges the gap, giving you the extra length you need for clean, professional cable management-.

Configuration How to Use Best For

8-Pin EPS12V Keep the two 4-pin sections clipped together Motherboards with 8-pin CPU power ports

4-Pin ATX12V Slide the two 4-pin sections apart Motherboards with 4-pin CPU power ports

8+4 Pin Use one cable as 8-pin, another as 4-pin High-end motherboards with 8+4 or 8+8 CPU power requirements