24Pin to 18Pin ATX PSU Power Adapter Cable 24P to 18P Main Power Supply Cord for HP Z220 Z230 Z420 Z620 Workstation, 18AWG 13-inch (33cm) Replace Proprietary HP PSU with Standard ATX Power Supply

1. CONVERT STANDARD ATX PSU TO HP 18-PIN WORKSTATION MOTHERBOARD This adapter cable allows you to use a standard 24-pin ATX power supply with HP Z Series workstations that feature a proprietary 18-pin power connector. The 24-pin female end plugs into your standard ATX power supply, and the 18-pin male end connects directly to your HP workstation motherboard. No modification required simply plug and play.
2. COMPATIBILITY HP Z220/Z230/Z420/Z620 SERIES ONLY This cable is specifically designed for HP workstations with an 18-pin power connector on the motherboard. Compatible models include: HP Z220 (CMT and SFF) HP Z230 HP Z420 HP Z620 Also compatible with HP Z210 (some sources indicate compatibility, while others exclude it please verify your motherboard connector before ordering) NOT compatible with other HP models, other brands, or motherboards without an 18-pin power port. Using this cable with an incompatible motherboard will burn or damage the motherboard.
3. 18AWG HIGH-QUALITY WIRE SAFE & RELIABLE Constructed with 1007-18AWG standard tin-coated copper wire for stable, efficient power delivery. The 18AWG gauge provides lower resistance and better conductivity than thinner cables delivering clean, stable power to your workstation motherboard. Supports up to 1000W power output.
4. 13-INCH (33CM) LENGTH PERFECT FOR CABLE MANAGEMENT At 13 inches (33cm) including connectors, this cable provides the ideal length to connect your ATX power supply to your HP workstation motherboard. Long enough to reach comfortably while allowing for neat cable management no excess slack to clutter your workstation case.
5. DURABLE & FLEXIBLE CONSTRUCTION Made with high-quality black environmentally friendly plastic housing that protects the cable and ensures stable operation. The flexible design allows for easy routing inside your workstation chassis. Tin-plated copper core ensures efficient and stable current transmission.
6. COST-EFFECTIVE SOLUTION REPLACE FACTORY PSU Instead of being locked into expensive proprietary HP power supplies, this adapter allows you to use any standard ATX power supply with your HP workstation. Upgrade to a higher-wattage PSU for better performance, or replace a failed factory power supply with a more affordable standard ATX unit.
7. PLUG-AND-PLAY EASY INSTALLATION Simply connect the 24-pin female end to your standard ATX power supply and the 18-pin male end to your HP workstation motherboard. No drivers, no software, no complex setup just plug it in and power on.
8. CRITICAL SAFETY WARNING READ BEFORE BUYING This cable is ONLY for HP Z220/Z230/Z420/Z620 workstations with an 18-pin power connector on the motherboard. Do not connect this cable to any non-HP motherboard or incompatible HP model it will burn or damage the motherboard. We assume no responsibility for incorrect use or installation.

Does your HP Z Series workstation use a proprietary 18-pin power supply thats expensive to replace or limits your upgrade options? The 24 Pin to 18 Pin ATX Power Adapter Cable is the simple, cost-effective solution-2.

This adapter cable allows you to connect any standard 24-pin ATX power supply to HP Z Series workstations that feature a proprietary 18-pin power connector on the motherboard-. Instead of being locked into expensive HP-branded power supplies, you can use affordable, high-performance standard ATX power supplies from any brand.

The Problem The Solution

HP uses proprietary 18-pin power connectors on Z Series workstations This adapter converts standard 24-pin ATX to 18-pin HP connector

Factory HP power supplies are expensive and hard to find Use any standard ATX power supply more affordable and readily

available

Limited upgrade options with factory PSU Upgrade to higher-wattage PSU for better performance

Failed factory PSU means expensive replacement Replace with a standard ATX PSU at a fraction of the cost