PCIe Cable for Antec PSUs CPU 8 Pin Male to Dual PCIe 8 Pin (6+2) Male GPU Power Adapter Sleeved 25-inch (63cm) 18AWG for Graphics Card (Compatible with Specific Antec Models Only)

1. CONVERT SINGLE CPU 8 PIN TO DUAL PCIe 8 PIN (6+2) POWER This adapter cable allows you to power two 8-pin or 6-pin graphics cards from a single ATX CPU 8-pin port on your Antec power supply. The red ATX 8-pin male end plugs into your PSUs CPU 8-pin port, and the two PCIe 8-pin (6+2) male ends connect to your graphics cards. The 6+2 design allows each end to be used as either a 6-pin or 8-pin connector by sliding the extra 2-pin section on or off.
2. COMPATIBILITY SPECIFIC ANTEC MODELS ONLY This cable is ONLY compatible with specific older Antec PSU models that have a single red CPU 8-pin port. Compatible models include: Neo ECO Series: 400W/450W (old type only), 520/620 TPQ Series: TPQ-850/1000/1200 Signature Series: SG-650/850 True Power Series: TP-550/650/750 True Power New Series: TPN-550/650/750 CP Series: CP-850/1000 Other Models: VP650PM, HCP-1200 (old type semi-modular) NOT compatible with newer Antec PSUs, other PSU brands (Corsair, EVGA, Thermaltake, etc.), or any model not listed above.
3. CRITICAL SAFETY WARNING READ BEFORE BUYING The ATX 8-pin male connector on the PSU end is NOT a PCIe 8-pin connector. The 8-pin end and the two 8-pin (6+2) ends CANNOT be used interchangeably. Using this cable with an incompatible PSU or connecting it incorrectly will burn or damage your PSU or graphics card. We assume no responsibility for incorrect use or installation.
4. 18AWG HIGH-QUALITY WIRE SAFE & RELIABLE Constructed with 1007-18AWG standard tin-coated copper wire for stable, efficient power delivery. The 18AWG gauge provides lower resistance and better conductivity than thinner cables delivering clean, stable power to your graphics cards. Each cable is factory-tested to ensure quality and reliability.
5. PREMIUM SLEEVED DESIGN CLEAN & PROFESSIONAL Features high-quality sleeving that gives your build a clean, professional appearance. The sleeved construction not only looks great but also provides improved flexibility for easier installation and cable management inside your case.
6. 25-INCH (63CM) LENGTH EASY CABLE MANAGEMENT At 25 inches (63cm) including connectors, this cable provides ample length to reach your graphics cards comfortably while allowing for neat cable management. The Y-split design allows you to power two GPUs from a single PSU port.
7. DESIGNED FOR GRAPHICS CARDS NOT FOR MOTHERBOARDS This cable is specifically designed for graphics/video cards only it does NOT work with motherboards. Compatible with 6-pin and 8-pin graphics cards from popular manufacturers including ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, and more.

Does your Antec power supply have an extra CPU 8-pin port that youre not using, but you need to power multiple graphics cards? The PCIe Cable for Antec PSUs is the solution youve been looking for.

This adapter cable allows you to connect two graphics cards with 6-pin or 8-pin PCIe power connections to a single ATX CPU 8-pin port on your compatible Antec power supply. Instead of upgrading your entire power supply, simply add this cable and power your modern GPUs-.

The Problem The Solution

Your Antec PSU has an unused CPU 8-pin port This adapter converts CPU 8-pin to dual PCIe 8-pin (6+2)

You need to power two graphics cards Power dual GPUs from a single PSU port

You want to avoid the cost of a new PSU A cost-effective alternative to PSU replacement

Compatible Antec PSU Models (Specific Older Models Only):

Series Compatible Models

Neo ECO 400W/450W (old type only), 520/620

TPQ TPQ-850/1000/1200

Signature SG-650/850

True Power TP-550/650/750

True Power New TPN-550/650/750

CP CP-850/1000

Other VP650PM, HCP-1200 (old type semi-modular)

× NOT Compatible:

1. Newer Antec PSU models not listed above
2. Antec Neo ECO newer models (only old type compatible)
3. All other PSU brands (Corsair, EVGA, Thermaltake, CoolerMaster, etc.)
4. Any PSU model not explicitly listed above

1. The ATX 8-pin male connector on the PSU end is NOT a PCIe 8-pin connector
2. The 8-pin end and the two 8-pin (6+2) ends CANNOT be used interchangeably
3. Using this cable with an incompatible PSU will burn or damage your PSU or graphics card
4. This cable is for graphics cards ONLY it does NOT work with motherboards

Step 1: Power off your computer and unplug the power cord from the PSU.

Step 2: Verify your PSU model this cable is ONLY for the Antec models listed above. If you have a different model, DO NOT use this cable.

Step 3: Locate the red CPU 8-pin port on your Antec power supply-.

Step 4: Plug the red ATX 8-pin male end of the adapter cable into your PSUs CPU 8-pin port. (This end is NOT for PCIe its for the PSU side only.)

Step 5: Connect the two PCIe 8-pin (6+2) male ends to your graphics cards-. For 6-pin connections, slide the extra 2-pin section off each end.

Step 6: (Optional) Use the included self-adhesive tape to secure the cable for clean cable management.

Step 7: Close your case, plug in the power cord, and power on.