POE Over Coax Converter BNC to Ethernet IP Extender EOC, 3280ft(1000m) Power & Data Transmission Over RG59 Coaxial Cable for Analog to IP CCTV Security Surveillance System Upgrade 2 in1 BNC+Twist Pair

The EoC Receiver is equipped with a DC48V/12V Plug (no additional power needed when using POE) and a Lan(IN) Port for linking to a Standard POE Switch or Standard POE injector. The EoC Transmitter has a DC12V Plug (no extra power required when using POE) and a Lan(OUT) Port for connecting to POE-powered equipment or non-POE devices such as IP cameras, VoIP phones, and WiFi APs. The integrated Dual-Medium POE Transmission removes the requirement for extra BNC-to-twist-pair adapters, providing stable and efficient operation. It allows POE power and data transmission over both coaxial (BNC-F interface) and twisted pair cables. This makes it perfect for elevator cart CCTV systems or industrial sites, addressing POE device connectivity issues where rewiring is not feasible. Reuse existing RG59, RG6, or RG11 coaxial cables to upgrade analog surveillance systems to IP networks, avoiding the expense and difficulty of rewiring. The LAN RJ-45 port supports both 568A and 568B wiring standards and works with IEEE802.3af (PoE) and 802.3at (PoE+) protocols. It is suitable for various scenarios such as security video systems, home automation, access control, multimedia systems, education systems, and information diffusion systems. Each set contains 1 Transmitter and 1 Receiver. The industrial-grade reliable POE Setup features a built-in heat sink, ensuring continuous POE transmission during extended use. With a small and light design (4.33" x 2.17" x 0.98"), it is simple to install and position. No complex setup is neededjust connect the receiver to a POE switch via the Lan (IN) port, and connect the transmitter to POE cameras via the Lan (OUT) port. (Pre-paired for indoor use only; do not combine with other devices.) It supports steady long-distance transmission: 100Mbps (300m/1000ft) or 30Mbps (2000m/6560ft) over coaxial cable, and 75Mbps (300m) or 25Mbps (2000m) over twisted pair. Compatible with CCA/CCU cables, it simultaneously transmits video, audio, data, control signals, and POE power to fulfill remote monitoring requirements. (Note: The speed rate refers to a single pair; connecting additional devices will reduce the speed.)