Your Browsing History
- Free 30-day Returns
$119.99
Meet Your Seller
Sponsored Products
Upgrade Advanced Network Cable Tester with PoE& NCV,Cable Length Test,Port Flashing,Multifunction Anti Interference Scanning Modes Wire Tracker
- Cable Length Test:Accurately measure the cable length without calibration, and the range is 1-500 m. It can detect the cross, short circuit, and open circuit of cables.
- Scanning Modes:Three scanning modes can be selected: normal mode/anti-interference mode/PoE mode.
- Port Flashing:Through the flashing port indicator on the hub/switch, the hub flashes to locate the network port, which can quickly find the network cable on the switch/router. It can be used for 10M/100M/1000M hubs/switches.
- POE Test:Determine which pins are supplying power and detecting voltage, determine the type of PSE (according to/af standard), and detect the presence of AC voltage (50V-1000V). Test the physical state of STP and UTP lan cables.
- Cable Pressing Test:Add cable pressing function test to test whether the crystal head is pressed well.
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Cross, short circuit, open circuit, normal
Network cable length break point test / calibration
Normal mode / anti-interference mode
Quickly find network cables on switches/routers
Test whether the crystal head is pressed well
Target line can be determined based on flashing light
LED Funtion (Receiver)
The lighting button can be used to control the switching of the lighting switch status on any interface. Press once to turn on the lights and press again to turn off the lights
NCV Funtion (Receiver)
The NCV function is used to detect the presence of strong current cables in the work environment to ensure construction safety. Briefly press the receiver NCV key to enter the NCV mode. When an AC voltage greater than 70V is detected, the receiver emits a "drip" sound
Network cable length break point test / calibration
Normal mode / anti-interference mode
Quickly find network cables on switches/routers
Test whether the crystal head is pressed well
Target line can be determined based on flashing light
LED Funtion (Receiver)
The lighting button can be used to control the switching of the lighting switch status on any interface. Press once to turn on the lights and press again to turn off the lights
NCV Funtion (Receiver)
The NCV function is used to detect the presence of strong current cables in the work environment to ensure construction safety. Briefly press the receiver NCV key to enter the NCV mode. When an AC voltage greater than 70V is detected, the receiver emits a "drip" sound
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by B-IN Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...