ARCTIC P12 PWM PST A-RGB (3 Pack) - PC Fans, 120mm PWM Case Fan Optimized for Static Pressure, Semi-Passive: 2002000 RPM (0 RPM <5%), 5V 3 pin ARGB LED - White

The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time promises maximum performance when required.
The P12 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus promises extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while promising maximum cooling performance.
Fan Speed: 200-2000 RPM (0 RPM below 5% PWM)
Airflow: 48.8 CFM/82.91 m³/h
Static Pressure: 1.85 mm HO
Noise Level: 0.3 Sone
Operating Ambient Temperature: 0-40 °C
Fan Frame: Standard
Control Type: PWM PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing
Typical Voltage: 12 V DC
Starting Voltage: 5 V
Current/Voltage: 0.11 A/12 V
Cable Length: 400 mm
LEDs: 12 A-RGB LEDs
Connector: 3-Pin 5V-DI-GND Connector
Current/Voltage: 0.4 A/5 V
Cable: 450 mm cable with 80 mm sharing cable, black
Length: 120 mm
Width: 120 mm
Height: 25 mm
Weight: 131 g