• $35.84
  • Free 30-day Returns
  • Ships from Hong Kong.
    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    DTECH USB to TTL Serial Adapter 3.3V Debug Cable TX RX Signal 4 Pin Female Socket PL2303 Prolific Chip for Windows 10 8 7 XP Vista (3-Meter, Black)

    • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
    • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
    • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND
    • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
    • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
    +
    +
    Overview
    Specs
    Reviews
    6-Foot PL2303TA chip USB to TTL serial adapter cable for 3.3 V logic level serial communication (rx, tx, vcc and GND)
    This USB TLL serial converter is built with Prolific PL2303 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.

    NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on Prolific official website

    The original PL2303 chip is embedded in the USB-A end; 4 way 0.1 ” header connector with GND (ground), VCC (5V), RX and TX at 3V3 logic level.

    Applications:
    Upgrading Legacy Peripherals to USB
    Interface Microcontroller UART or I/O, FPGA / PLD to USB
    Industrial Control
    USB Software / Hardware Encryption Dongles

    ... Features
    - The I/O pins of the wire are configured to operate at 3.3V logic level - Entire USB protocol handled by the electronics in the cable;
    - UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
    - Data transfer rates from 300 to 3M baud rate at TTL levels;
    - Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
    - UHCI / OHCI / EHCI host controller compatible

    Specific
    Interface A: USB 2.0 type A Male Port
    Interface B: 4 pin Female Socket flying leads
    Chip: Prolific PL2303TA Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit);
    Cable Colour: Black
    Wire Length: 1.8 Meter

    What’s Included
    1 x USB to Serial TTL Level Converter Cable 6ft
    1 X User Manual

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...