| Dimension | 60*60*25mm |
|---|---|
| Current & Voltage | 0.25A/12V |
| Noise | 37.5dBA (Max) |
| Pressure | 6.0 mmH2O |
| Cable Length | 400±15mm (15.7inch) |
| Fan Speed | 5600RPM+-10% |
Products Details
High Airflow Pressure Blade
With PBT Material: Even the Fan with High Speed, The Fan Blade is Very difficult to deform, Then the Fan can work with stronger wind & lower noise.
Long Life Sleeving Bearing
Sleeve Bearing Copper Motor and Thread with Stable 267IC: Using most stable original 267 IC Module with Copper Moto and Thread can lower the Temprature & Current of Motor,make sure the Fan with Very Low Noise and stable quality.
2Wire Connection Protection
2 Wire XH2.54 Connection with Reversing Connection Protection: Even You are Unprofessional,You can do the work .It has negative and positive only and even If wire Wrong connected,Fan will not burn but just not work.
| Products | |||||
|---|---|---|---|---|---|
| Dimension | 80*80*25mm | 120*120*25mm | 120*120*45mm | 120*120*38 mm | 120*120*25mm |
| Dimension | 3.15*3.15*0.98inch | 4.72*4.72*0.98inch | 4.72*4.72*1.77inch | 4.72* 4.72 *1.5 inch | 4.72*4.72*0.98inch |
| Current | 0.2A | 0.5A | 0.25A | 0.75A | 0.25A |
| Connector | 2 PIN XH2.54 | 3 PIN-2510 | USB | 3PIN | 2 PIN XH2.54 |
| Airflow | 40CFM | 101.7CFM | 45CFM | 152CFM | 47CFM |
| Speed | 3000RPM ±10% | 3000RPM ±10% | 1100-1500RPM ±10% | 3700RPM ±10% | 1600RPM ±10% |
| Bearing Type | Sleeve | Dual Ball | Hydraulic | Dual Ball | Sleeve |
| Noise | 31dB | 44.4dB | 28dB | 53dB | 30 dB |
| Voltage | 12V | 12V | 5V | 24V | 12V |
| Packing | 2 PCS | 3 PCS | 1 PCS | 1 PCS | 2 PCS |













