Meet Your Seller
VIVO 500ft Cat6 Pure Copper LAN Cable Wire 500 ft Waterproof Outdoor Burial
- Cable Type: Cat6 bulk ethernet cable, 500ft roll. Suitable for Fast, Gigabit, and 10-Gigabit Ethernet
- Material: Solid Pure Copper 23 AWG, Waterproof shielding (NOT UV rated)
- Solid UTP: 4-pair unshielded twisted pair cables for economic use connector free. Conforms to TIA/EIA
- Application: For direct outdoor burial, reel spool box ideal for network installation. Transfer Rates of 10/100/1000 Mbps. NOT meant for direct sunlight
- Color: Outside jacket comes in a black finish
Any questions? Ask CelesteSM will help you find out quickly.
Cat6 UTP (unshielded twisted pair) PURE COPPER 23 AWG bulk ethernet cable is ideal for your network installation. Case contains 500 ft of wire in waterproof shielding for outdoor direct burial.This cable is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet). It comes in its own spool box and is connector free, giving the user the freedom to customize the length, wiring, and application.
Applications:
- For direct outdoor burial
- Other network installations
Technical Data:
- 4-pair unshielded twisted pair
- 500 FT Cat6
- Waterproof shielding
- Up to 550 MHz
- 23 AWG solid pure copper
- Conforms to TIA/EIA
- Transfer Rates of 10/100/1000 Mbps
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by VIVO Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The VIVO 500-ft Cat6 bulk Ethernet cable is a connector-free roll of solid 23 AWG pure-copper, four-pair UTP wire with waterproof shielding for direct burial. It suits network installers who need to make custom-length outdoor runs; it is not UV-rated for direct sunlight.
Recommended For
- DIY installers running a fixed, non-PoE Ethernet link underground to a detached garage, shed, or similar outbuilding, where the cable can be buried and both endpoints have separate power.
- Home or small-office network installers who need bulk cable to cut and terminate several custom-length, non-PoE runs instead of buying pre-terminated cords.
- Property owners making a protected outdoor route—such as a buried run or a run inside suitable conduit—who need waterproof shielding and can keep the cable out of direct sunlight.
Real-World Use Scenarios
- A homeowner runs a buried Ethernet link from the house to a detached garage or workshop, then connects a switch or access point there; the outbuilding gets a wired network connection instead of relying on a weak Wi-Fi signal from the house.
- A property owner routes cable underground to outdoor PoE security cameras; with compatible PoE equipment, each cable run carries network data and power without needing a separate power outlet at the camera.
- Someone adds Wi-Fi coverage to a yard, patio, or other area beyond the house by burying a run to an outdoor access point; the access point receives a wired network connection rather than depending on a distant wireless signal.
- A homeowner connects a shed or other outbuilding to the main home network for a work computer or other wired devices; the bulk cable can be cut to the needed run length and terminated at each end. Keep any above-ground section out of direct sunlight or protect it, since this cable is not UV rated.



















