Meet Your Seller
VIVO Blue 500ft Bulk Cat6 Full Copper Indoor LAN Ethernet Cable | UTP Pull Box
- Cable Type: Cat6 bulk ethernet cable, 500 ft roll, connector free. Suitable for Fast, Gigabit, and 10-Gigabit Ethernet
- Material: Solid Pure Copper 23 AWG, conforms to TIA/EIA and fluke tested
- Solid UTP: 4-pair unshielded twisted pair cables for economic use, CM (In-Wall Rated)
- Easy Spool Box: Ideal for network installation. For indoor use, patch cables, crossover cables
- Color: Outside jacket comes in a blue finish
Any questions? Ask CelesteSM will help you find out quickly.
Cat6 UTP (unshielded twisted pair) PURE COPPER 23 AWG bulk ethernet cable in easy to use pull box is ideal for your network installation. Case contains 500 ft of wire with a blue jacket. Category 6 cable, commonly referred to as Cat6, is a cable standard for Gigabit Ethernet and other network protocols. This cable is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet). It comes in its own spool box and is connector free, giving the user the freedom to customize the length, wiring, and application.
Applications
- For indoor use
- Patch cables
- Crossover cables
- Other network installations
Technical Data
- 4-pair unshielded twisted pair
- 500 FT Cat6
- 23 AWG Solid Pure Copper
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by VIVO Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The VIVO Blue 500ft Cat6 cable is a connector-free, solid-copper indoor Ethernet cable in a pull box, suited to network installers and DIY users wiring home or office networks who want to cut custom cable lengths.
Recommended For
- Homeowners wiring several rooms with permanent indoor Ethernet runs from a central router or switch, with the cable terminated at wall jacks or a patch panel.
- DIY installers or renovators creating multiple custom-length indoor Ethernet runs who can route and terminate connector-free bulk cable.
- Small-office or homelab builders installing fixed indoor network drops where they want to cut cable to route-specific lengths rather than buy many pre-terminated cables.
- Installers making stationary indoor drops for devices such as access points or computers, where the cable will be secured in place and not routinely moved.
Real-World Use Scenarios
- During a home remodel, pull separate runs from a central network location to bedrooms, a den, or a home office. Terminate each run at a wall jack or patch panel so devices can connect through short patch cables.
- Run a cable to a ceiling or high-wall wireless access point location. A wired connection gives the access point a direct network link instead of relying on a wireless backhaul.
- Prewire planned indoor security-camera locations back to the network or recorder area. With compatible PoE cameras and network equipment, one cable run can carry both data and power, reducing the need for a separate power outlet at each camera.
- Wire a home office, media room, or gaming area back to the router or switch. Custom-length runs let a desktop, console, or TV use a wired network connection without leaving a long loose cable across the room.
- Add several fixed network drops in a small office or workshop from one bulk box. The installer can cut each run to suit the route and terminate the ends for the room layout, rather than relying on a set of pre-made cable lengths.

























