New Upgraded Network Cable Tester with Optical Power Meter VFL,RJ11 RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance
Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port.
Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function.
PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc
Cable Length Test: The RJ45 RJ11 cable tester can quickly measure the length of the cable with a range of 200m. Not only network cables, but also phone lines and BNC cables.
Long Battery Life + Type-C Charging: Built-in 1500mah 3.7V lithium battery, running time of 10 hours, Type-C charging is more convenient. The flashlight solves the trouble of working in the dark


Poe Test Quickly Identify
Poe cable tester can test the information of standard Poe device such as POE voltage, power supply polarity power supply mode and also the type of PSE

NcV Induction Pen
One-click identification of live equipment can detect wires and sockets to avoid the danger caused by strong electricity during construction

Optical Power Meter Test
Automatic identification of fiber frequency. 6 wavelengths, high precision testing

LENGTH MEASUREMENT
Connect the cable to the "LENGTH/FLASH" port on the transmitter and the indicator on the port will flash. The measurement range of cable length is 2.5 m to 200m

Port Flash
Quickly & Exactly find out the target cable port to improve work efficiency

1500mah 3.7V Lithium Battery
Long Battery Life + Type-C Charging: running time of 10 hours, Type-C charging is more convenient.

What Can You Get?
1x Transmitter
1x RJ11 interface telephone cable
1x Earphone Cable
1x Receiver
1x RJ11 alligator clip cable
1x R45 interface network cable
1x Type-C charging cable


Transmitter
CONT Wiremap Port --RJ45
CONT MAX range--300m
CONT STP/NTP
Scan Digital/Analog mode
Frequency--455KHz Frequency--455KHz
Port Flash Full duplex / Half duplex
Port Flash 10m/100m/1000m
Length 20M+/- 1.6M, 20M~100M+/- 2.4M, 100M+/- 3.2M
PoE End connection /Middle jumper / Powered by 8 cores
PoE PoE Power supply--Voltage detection
NVL 10Mw
Power meter 850/1300/1310/1490/1550/1625 ( Wavelength )
Crimping RJ45 -8 Cores, Min length is 10 cm
Lower voltage warning < 3.5V ± 0.1V
Power supply 3.7V 1500mAh Polymer lithium battery
Transmitter size 148 X 70 X 32 mm
Receiver
Sensitivity adjustable YES
MAX range 300m
Digital/nalog mode YES
MAX working current 300mA
NCV YES
Lamp YES
Lower voltage warning YES
Power supply 3.7V 1500mAh Polymer lithium battery
Receiver size 198 x 50 x 28 mm