DRIPSTONE CAT6 1000ft 23AWG 550Mhz Solid UTP Ethernet Cable RJ45 CCA Bulk Network LAN Wire RJ45 Easy Pull Box 305M (Black)

Data Transfer Rate: CAT6 cables are designed to support data transfer rates of up to 10 Gbps (gigabits per second). This makes them suitable for high-speed networks, including Gigabit Ethernet and some 10 Gigabit Ethernet installations.
Crosstalk Reduction: CAT6 cables are constructed with tighter twists in the cable pairs and often feature additional insulation to reduce crosstalk, which is electromagnetic interference between adjacent pairs of wires. This results in improved signal quality and less data loss.
Backward Compatibility: CAT6 cables are backward compatible with older Ethernet standards such as Cat5 and Cat5e. You can use CAT6 cables in networks that use these older standards, but the performance will be limited to the capabilities of the lowest-rated component.
Connector Type: CAT6 cables typically use RJ-45 connectors, the standard connector for Ethernet connections. These connectors have eight pins and are used for both CAT6 and older Ethernet cables.
Wire Gauge: CAT6 cables use 23 AWG (American Wire Gauge) conductors, which are thicker than the 24 AWG conductors used in Cat5e cables. This larger wire gauge helps reduce signal attenuation over longer cable runs.
Maximum Cable Length: The maximum recommended length for out CAT6 cable is 100 meters (328 feet) when used for 10/100/1000BASE-T Ethernet
Cable Construction: 23AWG UTP (Unshielded Twisted Pair Wire) CCA Conductor (Copper Clad Aluminum) with new PVC (Polyvinyl Chloride) outer jacket. Inside twisted pairs insulation consists of polyethylene (PE) coating
Sequential Length Markings: Running " FT" count printed on cable makes measuring easy. These markings are printed every 2 feet, and they start from one end of the cable and count up as you unroll the wire