BNC to UHF radio antenna connector adapter
Outer shell: Copper nickel plated; Inner needle:Copper silver plated; Insulator: Teflon (PTFE)
BNC female (jack hole) to UHF male PL-259 (plug pin) coaxial connector; Impedance: 50 ohm
PL259 male to BNC female connectors support a cost effective solution to connect with UHF connectors and BNC adapter together quickly. No need to solder and crimp.
It allow you to avoid the trouble of mess two cables for your antenna. You don't need to add an extra length of coax jumper cable.
This pl-259 UHF Male to BNC Female Adapter work very well for connecting smaller flexible cables to large cables sizes used in long runs for HF or shorter runs for VHF/UHF.Also for connecting between your ham rig and antenna switch so that you don't have to run a short coax.For ham radio,to join your RF cables in your amateur Radio station.Necessary to join cables.
Low loss, low SWR interference.Quality product, no discernible loss in signal or noise introduction.Brass Construction and nickel plating.The pins are Copper-Gold plating.Low signal loss.50 ohm impedance.UHF Female end is Outside threads and hole.
BNC to UHF radio antenna connector adapter
Outer shell: Copper nickel plated; Inner needle:Copper silver plated; Insulator: Teflon (PTFE)
BNC female (jack hole) to UHF male PL-259 (plug pin) coaxial connector; Impedance: 50 ohm
PL259 male to BNC female connectors support a cost effective solution to connect with UHF connectors and BNC adapter together quickly. No need to solder and crimp.
It allow you to avoid the trouble of mess two cables for your antenna. You don't need to add an extra length of coax jumper cable.
This pl-259 UHF Male to BNC Female Adapter work very well for connecting smaller flexible cables to large cables sizes used in long runs for HF or shorter runs for VHF/UHF.Also for connecting between your ham rig and antenna switch so that you don't have to run a short coax.For ham radio,to join your RF cables in your amateur Radio station.Necessary to join cables.
Low loss, low SWR interference.Quality product, no discernible loss in signal or noise introduction.Brass Construction and nickel plating.The pins are Copper-Gold plating.Low signal loss.50 ohm impedance.UHF Female end is Outside threads and hole.