Wireless HDMI Transmitter and Receiver (Receiver Only)

This is a receiver-only unit. It supports 1 TX to 1 RX (1300FT/400M), 1 TX to 2 RX (656FT/200M), 1 TX to 3 RX (490FT/150M), 1 TX to 4 RX (393FT/120M), and 1 TX to 5 RX (262FT/80M). As the number of RX units increases, the wireless transmission distance will be reduced. Plug and Play with 1080P Resolution: Quick and simple setup requires no software installation, eliminating cable clutter for a true plug-and-play experience. The wireless HDMI transmitter and receiver utilize HDCP version 1.4 with input/output resolutions up to Full HD 1080p @60Hz. With a latency of 0.05s, it is suitable for real-time games and sports programs. Loop Out & Dual HDMI Out with IR Remote Control: The wireless video transmission system enables the source device to recognize remote commands. You can use the included IR cable to control the HDMI source device from an auxiliary location, typically where the HDTV is situated, for added convenience. The extra HDMI loop out on the transmitter side allows you to add a local monitor for monitoring. The dual HDMI output on the receiver side lets you connect two screens simultaneously for more convenient monitoring. Multiple Power Options: This Wireless HDMI Extender Kit provides a variety of power supply options. It can be powered by NP-F Series batteries (F970, F750, F550 series), 5V2A type-C adapters, and 5V2A portable rechargeables, meeting power supply needs in various usage scenarios. Note: Batteries are not included with the product. Up to 1 TX to 5 RX: The wireless video transmission system can switch between up to 5 different receiving devices. Transmission distance decreases as the number of receiving units increases