Small Water Leak Detectors for Homes & Businesses - 6-Pack | No Setup Required - Patented Design - Use Under Sink, Toilet, Basement, RV, Water Heater, Dishwasher - Reusable Alarm

NO SETUP NEEDED -
PLACE AND SECURE: This compact water leak detector comes with a factory-installed, pre-tested battery sealed inside - no battery installation, no tools, and no app required. Open the box, position each unit on the floor near any water connection, and your home is safeguarded from the initial drip. Done in moments. UP TO 95 dB
ALARM AT THE SOURCE: It produces up to 95 dB at the leak site, similar to an alarm clock. Optimal results are achieved by placing it close to the water source inside an enclosed cabinet or under a sink. For whole-floor monitoring, position two units together or consider upgrading to a 110 dB model. FACTORY-SEALED BATTERY - UP TO 3
YEARS OF ACTIVE USE: The internal 12V battery is sealed at the factory and cannot be replaced by the user.
This is a design feature: the absence of a battery compartment prevents accidental installation errors. Each unit has a replace-by date stamped on the housing - your built-in reminder to exchange for a fresh unit when protection requires renewal. ALERTS AT THE FIRST DRIP -
BEFORE WATER SPREADS: The instant water contacts the two metal prongs on the base, the alarm sounds. Place the prongs flat on the floor in the most probable path of a leak - directly behind a toilet, under a supply line, or at the low point of a drain pan - for the quickest response to even a slow drip. PROTECT AGAINST $5, 000+ IN WATER DAMAGE FOR UNDER $8
A SENSOR: A supply-line failure under a kitchen sink can result in $5, 000 or more in repairs, flooring replacement, and water damage restoration. This 6-pack covers three high-risk locations in your home, business, or RV for approximately $9 per sensor - protection that pays for itself with the first detection. COMPACT ENOUGH TO FIT WHERE WATER HIDES: At 1.75 x 1.5 x 1.5 inches, it fits behind toilet bases, beneath dishwasher kick plates, inside cabinet corners, and in HVAC drain pan channels where standard water alarm sensors cannot reach. Following any leak event, wipe the prongs dry and the unit is prepared for reuse until the replace-by date. PATENTED DESIGN FROM A FAMILY-OWNED AMERICAN BRAND: This patented water leak alarm is manufactured by Archetype Ltd., a family-owned company based in New Jersey. Reviewers consistently describe the unit as well-constructed and sturdy for the price. The single-piece sealed housing requires no assembly and is reusable after every leak event - wipe the prongs dry, and it remains operational until the replace-by date