2i2 USB Audio Interface with 48V Phantom Power 24Bit/192kHz 4 Line Outputs & 2 Line Inputs for the Musicians, Vocalist, Podcaster,USB Audio Interface Works with Most DAWs and Recording Software

High Quality 2i2 USB Audio InterfaceThe 2i2 USB Audio Interface features two XLR/1/4" combo inputs. With 2 balanced 1/4" TRS inputs for connecting phone, electronic synthesizers and mixing consoles. It also has 4 balanced 1/4" TRS outputs for connecting to studio monitors or headphones. Combo sockets accept both XLR and ¼ ( 6.35 mm) jacks. Microphones connect with XLR plugs; instruments and line-level signals should be connected via ¼ ( 6.35 mm) jack plugs of either TS or TRS type.
Sample Rates up to 24-bit/192kHzThe interface supports sample rates up to 24-bit/192kHz and features proprietary preamp technology for clean and transparent microphone amplification. OseTub USB Audio Interface enable you to record and mix at up to 24-bit/192kHz, achieving studio-quality sound.
Two Direct Monitoring Modes 2i2 USB audio interface has a MONO and STEREO switch (two direct monitoring modes), you can monitor directly through the preamp input, so you will get a completely delay-free sound that can accurately hear and process your recordings in real-time. You can also turn it OFF at any time.
Support 48V Phantom Power The 2i2 USB Audio Interface is equipped with 48V Phantom Power, allowing users to use microphones that require phantom power. Its important to note that not all microphones require phantom power, and using it with a microphone that does not require it can potentially cause damage.
4 Inputs and 4 OutputsThe 2i2 USB Audio Interface has 2 XLR/1/4" combo inputs, two balanced 1/4" TRS inputs and two balanced 1/4" TRS outputs, making it suitable for recording and playback of various audio sources. Plus, with two low-noise balanced outputs, you can enjoy crystal-clear audio playback or private listening with high-fidelity headphones.