Hydraulic Crimping Tool,with Cable Cutter & 9 Dies,Dattery Terminal Cable Crimper tool for 12 to 2/0 AWG, With Mini Heat Gun and Heat Shrink Tubing

Mini Heat Gun: A versatile portable tool for heat shrinking, embossing, shrink wrapping, and small repair tasks.

Safety Notice: Nozzle temperature reaches 200°C within seconds. Avoid continuous use beyond 10 minutes per session; allow cooling by powering off before reactivating for extended operation.

Complete Kit:

Includes: 1 hydraulic crimping tool, 9 sets of precision dies, 1 cable cutter, 1 portable case, 1 mini hot air gun, 5 pieces of red and 5 pieces of black heat shrink tubing (each 1m long, pre-shrink

diameters: 27mm/20mm/17mm/15mm/9mm). - Provides a comprehensive solution for cable termination tasks.

Hydraulic Crimping Tool

Specifications

: Hydraulic crimping tool with 10 ton crimping force, 0.45 inch stroke and 12AWG-2/0AWG crimping range, is a professional tool to crimp copper, aluminum and stainless steel

Heavy Duty Battery Crimping Tool: The hydraulic cable crimping tool can be used for car battery cables, welding cables, electrical cables, power wires, terminal lugs, etc. Additionally, the battery cable crimping tool can be rotated 180° freely to facilitate working in narrow spaces.

Complete Kit Includes: 1 hydraulic crimping tool, 9 sets of precision dies, 1 cable cutter, 1 portable case, 1 mini hot air gun, 5 pieces of red and 5 pieces of black heat shrink tubing (each 1m long, pre-shrink

diameters: 27mm/20mm/17mm/15mm/9mm). - Provides a comprehensive solution for cable termination tasks.

Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)

This set includes a cable scissors. Scissors are only suitable for cutting copper or aluminum cables.

This excellent compact heat gun can be used for heating shrinkable film, Suitable for heat shrink tubing, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun

100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical

Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness

There are heat vents in left and right sides to decreased the internal temp and extend its lifetime

The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously