Bluetooth Game Controller Left & Right Gamepad Handgrip Joystick for Ninten Switch NS Console with NFC Screenshot Turbo

Bluetooth Game Controller Left & Right Gamepad Handgrip Joystick for Ninten Switch NS Console with NFC Screenshot Turbo

Feature:

For initial connection pairing, please refer to the following steps:

1. Turn on the Switch host

2. Install the handle on the Switch host. Take advantage of the slide on the side of the host, slide the handle down from the top until you hear the gentle kata sound

3. The handle will be automatically registered and matched. After the matching is successful, you can plug it into the host machine for use or take it down

Connected by Bluetooth:

After the handle is installed on the host machine, the matching cannot be registered. Please check the matching problem by referring to the following methods:

1. Make sure your host has been upgraded to the latest system

2. Press the match key to close the handle, reset the connection of the handle, and then plug the handle into the host machine

3. Plug the handle into the host machine to make sure that the insertion direction is correct, slide to the bottom and hear the slight sound of cata

4. Unplug the handle from the host machine and try to insert it again. Rule out that the handle cannot be matched because it is not well touched

5. If the handle cannot be awakened, please charge your handle and try pairing again

Note:

1. The Switch host must be on. If the host is in hibernation or shutdown state, the handle cannot be matched

2. If the handle cannot be awakened or the LED indicator continues to flash slowly, please charge your handle before using i

How do I pair the handles back to the switch host

Mode 1 Bluetooth backlink pairing

1. Turn on the Switch host