Retro Gaming Console Stick Pro, Video Games Stick 40000+ with 4K HDMI | 40000+ Game System with 4K HDMI, Plug and Play TV Video Game Stick with Dual 2.4G Wireless Controllers (Pearl White)

Main Function 1.List: All the Games and simulators in the folder will be displayed on this page, with up and down selection and left and right page turning (in what simulator the game is in,there will be prompts on the screen). 2. Classification: Identify all simulators contained in the machine. 3. History: After playing,the game record will be in this interface. 4. Collection: Your favorite games can be added to the collection list.5. Search: filter the game according to the game name uppercase letters(Note:case insensitive) How to Connect to Your TV Step 1 Connect to TV: Please use the HDMI extension cable provided to plug the retro video game console into your TV/Computer/projectors HDMI interface to ensure there is no blockage between the retro stick and the gamepads. And switch TV mode to HDMI mode. Note: If plug the retro stick directly into your TV/Computer/projectors HDMI interface without an HDMI extension cable, the controller signal will be poor and the retro stick will get clogged, resulting in gamepad non-working. Step 2 Insert the Controller wireless receiver to the retro gaming stick, and make sure there is no blockage between the controller signal receiver and the gamepad. Note: If the wireless receiver is not plugged in properly, the game stick will not be able to receive a signal, which will cause the gamepad doesn't work. Step 3 Power Supply: Connect with a charging adapter (Not included) and the power will turn on automatically. Note: Please use a 5V/1A or higher power adapter to provide power to the retro stick. When retro gaming consoles don't work properly or games lag, a big reason is that the power is not available from the USB port. It is recommended to connect with the adapter of the phone charger, the power supply will be relatively stable. Please do not use the fast charger for power supply. Step 4 Install 2 AAA batteries (Not included) on each gamepad and turn on the switch, you're ready to play. Note: If the gamepad is not equipped with battery power, the gamepad will not work. Specification Material: plastic and metal / Plug: USB / Joystick type: 2PCS Controllers Output: HDMI Output / Support Up to 2 Players Input Power: USB 5v Operating Temperature: 0~40 Distance: 0~10 meters Notice: Please read the instructions carefully, packaging and the instruction contain important information,please keep the spare. Packing List 2 X Wireless Controllers 1 X Game Console 1 X USB Cable 1 X HDMI Extension Cable 1 X TF Card 1 X User Manual If the retro stick does not work, please follow these steps to check that the device is properly connected: 1. Check whether the switch of the gamepad is in the ON state. 2. Check whether the gamepad is lit red or green (red for player 1, green for player 2); 3. Check whether the Bluetooth wireless receiver is well inserted into the retro stick; 4. Check whether the stick lights up blue; 5. If the connection is correct, the primary gamepad(player 1) is red and the secondary gamepad (player 2)is green. 6. If the traffic lights are flashing at the same time, it means that the battery is low or the wireless receiver has not been successfully connected. (1) If the battery is low, replace the batteries of the gamepad. (2) If the Bluetooth wireless receiver connection is not successful, (may not be able to read the retro stick), please pull out the wireless receiver in the shutdown state and reinsert.