here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Instructions for calibrating the joysticks/triggers?
1. In the powered-on state,hold [LB + RB + Minus + Plus] for 8 seconds, the Status LED will blink.
2. Rotate joysticks slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.
3. Press the same buttons combination to complete.
How to enable the zero-dead zone mode on the joysticks?
In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.
Can I connect this controller to Switch 1/2?
Yes.
1. Update the firmware to the latest version or beta.
2. With the controller turned off, hold Y and turn on the controller.
3. Connect to your Switch 1/2.
Is the Motion Control available on both Windows and Android?
Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.
Does it support the mobile version of the software?
No, it only supports the Windows/macOS version of Ultimate Software V2.
TMR Joystick Replacement
8BitDo Products
Switch 2 JoyCon TMR Joysticks
8BitDo Custom-Colored Products
GuliKit's Product
| Compatibility | Windows 10 (1903) and above, Android 9.0 and above |
|---|---|
| Connectivity | 2.4G - Windows, Wired USB - Windows, Bluetooth BLE - Android |
| Joysticks | AKNES HallPi TMR joysticks |
| Triggers | Tactile / Hall Effect Linear Trigger |
| Polling rate | 1000Hz on both 2.4G and wired connections |
| R4/L4 bumpers & PL/PR buttons | Programmable and Mappable, Refined |
| 6-Axis motion control | Customizable 6-axis motion control, supported on both Windows and Android, can be configured as the left joystick / right joystick through the Ultimate Software V2. |
| Vibration | Rotor motor vibration, asymmetric vibration |
| Turbo function | D-pad, Joysticks, Home buttons, L4/R4 and PR/PL are not supported |
| RGB Fire Ring | Fire Ring Mode, Light-tracing Mode, Rainbow Ring Mode |
| Battery | 1000mAh built-in battery pack |
| Dimension/Weight | 147*103*61.3 mm, 246g |
| Package Contents | Ultimate 2 wireless controller * 1, Charging dock * 1, 2.4G USB-C adapter * 1, USB cable (1 meter) * 1, Manual * 1 |
| Support | Please feel free to contact our support team if you have any problems or concerns: 1) Read the AKNES store page introduction, by message. 2) Email. 3) By AKNES official web. - Contact informations there. |
Instructions for calibrating the joysticks/triggers?
1. In the powered-on state,hold [LB + RB + Minus + Plus] for 8 seconds, the Status LED will blink.
2. Rotate joysticks slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.
3. Press the same buttons combination to complete.
How to enable the zero-dead zone mode on the joysticks?
In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.
Can I connect this controller to Switch 1/2?
Yes.
1. Update the firmware to the latest version or beta.
2. With the controller turned off, hold Y and turn on the controller.
3. Connect to your Switch 1/2.
Is the Motion Control available on both Windows and Android?
Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.
Does it support the mobile version of the software?
No, it only supports the Windows/macOS version of Ultimate Software V2.