0.5M Internal Mini SAS HD SFF8643 to 4 x SATA Breakout Cable with Sideband Signal, 12Gbps SAS 6Gbps SATA Data Cord for Server RAID Controller NAS MultiHardDisk Storage Connection

This 0.5meter internal Mini SAS HD breakout cable converts one SFF8643 host port on RAID controller or motherboard into four independent SATA interfaces. Built with full sideband signal lines, it enables drive status reporting, allowing host controller to recognize harddisk information and alarm feedback normally.

It delivers 12Gbps maximum bandwidth for SAS hard drives, and is backward compatible with 6Gbps SAS and SATA drives to satisfy various servergrade storage requirements. The short 0.5meter length eliminates redundant cable slack, improves internal chassis airflow and simplifies cable management inside spacelimited NAS and server cabinets. Highquality insulated conductors minimize electromagnetic interference during continuous heavyload readwrite operations.

This cable is designed for hostside SFF8643 port only, not compatible with SFF8643 backplane ports. No driver installation required, works with mainstream Windows and Linux server operating systems.

Important reminder: Please confirm your controller port specification before ordering. Sideband function depends on RAID controller firmware support. Pure SATA hard drives can work normally, but some advanced SASonly features will be unavailable. Verify harddisk interface type to avoid mismatched hardware connection.