AJMRTC 1M SFF-8611 4I to SFF-8611 4I Oculink Internal Server Cable, Shielded High Bandwidth Storage Wire for RAID Card, NVMe SSD Backplane, Data Center Server Hard Drive Array

AJMRTC 1-meter SFF-8611 4I straight-through Oculink cable is specially developed for internal wiring of large server chassis, data center storage arrays and industrial NAS equipment. With dual standard Mini SAS SFF-8611 4I connectors and multi-layer anti-interference shielding design, it provides lossless high-bandwidth data transmission, fully meeting the stable long-running operation demands of professional storage hardware.

Both ends of the cable are equipped with standard SFF-8611 4I Oculink male connectors, bidirectional universal connection design. Different from adapter cables with signal conversion, this straight-through wire eliminates transmission attenuation to maximize data read and write efficiency. Gold-plated pins slow down oxidation and corrosion, solving poor contact problems caused by frequent disassembly in server maintenance.

The wire core is wrapped with double-layer shielding material, which can effectively block electromagnetic noise generated by server power modules, motherboards and graphics cards. It greatly reduces common failures such as frame drop, data loss and transmission stuttering during mass file access, reliable for 24/7 uninterrupted data center storage work.

The 1-meter length is customized for large-size server cabinets, multi-bay hard disk racks and separated RAID card installation. It reserves enough space for internal wiring without tight tension on the cable, and avoids tangled excess wires inside the case. Neat wiring improves air flow and heat dissipation, lowering hardware overheating risks.

The outer layer uses thickened flexible PVC material that withstands repeated bending and friction. Reinforced strain relief protection at the junction of cable and connector prevents internal copper wire breakage. The whole cable passes strict industrial durability tests, suitable for long-term heavy-load use in data centers, industrial workstations and NAS storage rooms.

This cable works perfectly with all storage devices with SFF-8611 4I Oculink interfaces:

1. PCIe Oculink RAID controller cards
2. Hot-swap multi-bay hard drive backplanes
3. NVMe SSD rack storage arrays
4. Large industrial data center servers
5. Multi-drive NAS storage chassis

No additional drivers or software are required, just plug and play to quickly complete server storage wiring replacement and hardware upgrade.

1. This cable is only for internal wiring inside server or NAS chassis, not for external extension use.
2. Please fully power off the storage device before plugging or unplugging the cable to avoid hardware short circuit damage.
3. Keep the cable away from high-power power cords to reduce extra electromagnetic interference.