Meet Your Seller
Slimline SAS MCIO SFF-8654 8i 74-Pin to Dual SFF-8639 U.2 with 15-Pin SATA Power Cable, Internal Server Storage Connection Cable(19.68in)
- MCIO 8i 74P to 2x SFF-8639 U.2 + 15-pin SATA power cable Converts one MCIO 8i 74-pin host port into two SFF-8639 U.2 NVMe SSD connections with separate SATA power connectors, supporting dual-drive NVMe storage expansion in servers, workstations, and storage chassis.
- Supports PCIe 5.0 x8 / PCIe 4.0 x8 high-speed links Built for PCIe 5.0 32GT/s and PCIe 4.0 16GT/s environments, splitting an MCIO 8i x8 signal into two independent x4 lanes for dual U.2 NVMe SSDs when the host controller supports PCIe bifurcation.
- Dual U.2 SFF-8639 connectors with dedicated 15-pin SATA power Each SFF-8639 end carries PCIe/NVMe data signals, while the additional 15-pin SATA power connectors supply drive power separately, helping simplify cabling in systems without a powered backplane.
- Shielded high-speed construction for stable NVMe performance Uses shielded differential-pair wiring to help maintain signal integrity at high bandwidths and reduce EMI/RFI interference inside dense server and workstation enclosures.
- Secure latching MCIO connector for reliable server installation The MCIO 8i end features a locking design and reinforced strain relief to resist vibration, repeated maintenance, and tight internal routing in 1U/2U/4U storage systems.
Any questions? Ask CelesteSM will help you find out quickly.
This MCIO 8i 74P to dual SFF-8639 U.2 + 15-pin SATA power cable is designed for high-density NVMe storage expansion in servers, workstations, and custom storage builds. The MCIO 8i 74-pin connector plugs into a compatible host port on a motherboard, riser card, RAID/HBA card, or storage backplane, while the two SFF-8639 U.2 connectors connect directly to U.2 NVMe SSDs.
The cable maps an MCIO 8i x8 PCIe link into two independent x4 lanes, allowing two U.2 NVMe drives to run simultaneously when the host controller supports PCIe bifurcation (x8 to x4+x4). Each SFF-8639 branch includes a dedicated 15-pin SATA power connector, providing separate power routing for drives that do not receive power from a backplane or carrier. This makes the cable especially useful for test benches, DIY NVMe enclosures, workstation upgrades, and server storage expansion projects.
The MCIO 8i connector is based on the SFF-TA-1016 high-density interface family and is commonly used in PCIe 5.0/4.0 server and workstation platforms. SFF-8639, also known as U.2, is a standard enterprise SSD interface that supports NVMe/PCIe storage protocols. The cables shielded construction and secure latching connectors help deliver stable performance in electrically noisy server environments.
Specifications
- Connector A: 1 x MCIO 8i Male, 74-pin, PCIe 5.0/4.0-ready high-density connector
- Connector B: 2 x SFF-8639 U.2 Female connectors for NVMe SSDs
- Power: 2 x 15-pin SATA power connectors for drive power supply
- Supported protocols: PCIe 5.0/4.0 x8 host link, dual x4 NVMe lanes, U.2 NVMe SSDs
- Typical applications: Dual U.2 NVMe SSD expansion, server/workstation storage upgrade, RAID/HBA card connection, NVMe backplane integration
- Build features: Shielded high-speed differential pairs, reinforced strain relief, secure latching MCIO connector, flexible internal routing
Compatibility Note
MCIO 8i 74P is not the same as SlimSAS SFF-8654 8i 74P, although both use 74-pin high-density connectors. Please confirm that your host board provides an MCIO 8i 74-pin port rather than an SFF-8654 SlimSAS port before purchasing. The dual-drive function requires host-side PCIe bifurcation support (x8 to x4+x4); otherwise, only one U.2 SSD may be recognized. This cable is intended for NVMe/PCIe U.2 SSDs and does not convert SAS or SATA protocols. Actual performance depends on host controller support, cable length, SSD compatibility, and system signal integrity.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Nexlly Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory













