4x Universal Electric Remote Control Key Fob 433MHz For Gate Garage Door

Features:

A fixed frequency remote cloner (433.92mhz) for copying most common fixed and learning code remote controls.

Ideal for use with Cars, Garage Doors, Gate Doors, Car sunroofs, Car/Motorbike alarms, Home security products, short-range wireless remote control products, Electrical appliances/Home automation such as lights, industrial control products, etc.

Note:

1. Your original remote control must be in working condition and operate at the same frequency as our remote control.
2. Before using our remote control duplicator to copy, first clear the existing code of your original remote control.
3. The self-learning remote control duplicator cannot copy rolling codes.

Specification:

Material: Metal + Plastic

Color: Black+Silver

Operating Voltage: DC12V

Operating Frequency: 433MHZ

Distance: Up to 50 meters (in open space)

Application: Remote Control Electric Door, Garage door, Rolling curtain, Switch, Security etc.

Support Coping Chip Models:

2260(All manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014,SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101,HCS200/HCS201(part code),HCS300/HCS301(part code), part single chip microcomputer etc.

Code Cleaning Method:

Press the unlock button and lock button at the same time (some models use up and down buttons). After the LED indicator flashes three times, release one button while holding the other. Press the released button three times; the LED will flash rapidly. All memory data is now cleared. The cleared remote will not light up when any button is pressed.

Copy Method:

Hold the original remote and the copy remote as close together as possible (ideally side by side with zero distance). Press the corresponding copy buttons on both remotes at the same time. When the LED flashes quickly after three flashes, copying is successful. Repeat for other buttons.

If the original remote has low transmitting power, place it directly against the copy remote. Operate away from interference. If copy fails, clear the code and try again.

(Attention: Your original remote control must be in working condition and operate at the same frequency as our remote control.)

Package Includes:

4 x Copy Remote Controller